Fujitsu B24W-7 LED Bruksanvisning

Fujitsu Følge B24W-7 LED

Les nedenfor 📖 manual på norsk for Fujitsu B24W-7 LED (43 sider) i kategorien Følge. Denne guiden var nyttig for 20 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/43
Display
Operating Manual
FUJITSU Display B24W-7 LED
Congratulations on your purchase of an innovative
product from Fujitsu.
Latest information about our products, tips, updates etc. can be found on
the Internet at: "http://www.fujitsu.com/fts/"
You can find driver updates at: "http://support.ts.fujitsu.com/download"
Should you have any technical questions, please contact:
• our Hotline/Service Desk (see the Service Desk list or visit:
"http://support.ts.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy working with your new Fujitsu system!
Remarks
Notes on the product description meet the design requirements of Fujitsu and are
provided for the purposes of comparison. The actual results may differ due to several
factors. Subject to technical changes without prior notification. Fujitsu accepts no
responsibility for technical or editorial mistakes or omissions.
Trademarks
Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited or its
subsidiaries in the United States and other countries.
Microsoft and Windows are trademarks or registered trademarks of the Microsoft
Corporation in the United States and/or other countries.
VESA, DDC and DPMS are registered trademarks of Video Electronics Standards Association.
All other trademarks specified here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transmitted by any electronic means
without the written consent of Fujitsu.
Important notes
• If you operate the device with the swivel arm or a similar accessory, it
must not be turned through 180°.
• The device may only be operated in wide format (0° landscape mode) and high format (90°
portrait mode). The buttons are located at the bottom in the middle of the monitor in wide format
(0° landscape mode) and at the left-hand side of the monitor in high format (90° portrait mode).
• Store this manual close to the device. If you pass the device on to third
parties, you should pass this manual on with it.
• We recommend that you place your device on a durable, non-slip surface. In view
of the many different finishes and varnishes used on furniture, it is possible that the
feet of the device may mark the surface they stand on.
• Avoid using high volumes for a long period of time, to prevent causing damage to your hearing.
• Warning against excessive volume from headphones: excessive volume from headphones
can cause hearing loss. Setting the equaliser to the maximum value increases the
headphones output voltage and thus increases the sound pressure.
Power cable
Use the supplied power cable only.
Use the following guidelines if it is necessary to replace the original cable set.
• The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements.
• The cable has to be HAR-certified or VDE-certified. The mark HAR or
VDE will appear on the outer sheath.
• For devices which are mounted on a desk or table, type SVT or SJT cable sets may be
used. For devices which sit on the floor, only SJT type cable sets may be used.
• The cable set must be selected according to the rated current for your device.
• If necessary, replace the original power cable with a regular grounded 3-core mains lead.
Transporting the device
Devic e,Transpo rtationRetra ns p ort at ion
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
8 Fujitsu
Important notes
Cleaning the device
Switch off the device and unplug the power plug.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid enters the device.
The display surface of the device is sensitive to pressure and scratches. Clean
it only using a soft, slightly moistened cloth.
The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that
has been moistened in m ild domestic detergent and then carefully wrung out.
CE marking
The shipped version of this device complies with the requirements of European Union
directives 2004/108/EC "Electromagnetic compatibility", 2006/95/EC "Low voltage directive" and
2009/125/EC "Ecodesign Directive".
Fujitsu 9
Important notes
Disposal and recycling
This device has been manufactured as far as possible from materials which can be recycled or
disposed of in such a way that the environment is not damaged. The device may be taken back after
use to be reused or recycled, provided that it is returned in a condition that befits its intended use.
Any components not reclaimed will be disposed of in an environmentally acceptable manner.
The device must be disposed of in accordance with the local regulations for disposal of special waste.
If you have any questions on disposal, please contact your local sales office or our
Service Desk, or contact one of the following directly:
Germany Belgium Switzerland
Fujitsu Technology Solu tions
GmbH
Remarketing and Recycl ing
D-33106 Paderborn
Tel.: +49 5251 / 81 80 1 0
Fax: +49 5251 / 81 80 15
"http://fujitsu.com/fts/remarketing"
RECUPEL
Boulevard Reyers, 80
B-1030 Brussels
Tel.: +32 2 / 706 86 16
Fax: +32 2 / 706 86 13
E-Mail: info@recupel.be
"http://www.recupel.be"
SWICO
Schweizerischer
Wirtschaftsverband
der Informations-,
Kommunikations- und
Organisationstechnik
A list of the SWICO acceptance
locations can be found at:
"http://www.swic o.ch"
Asia USA
Taiwan:
Environmental Protection
Administration
Executive Yuan R.O.C.
"http://recycle.epa.gov.tw"
Fujitsu America, Inc.
1250E. Arques Avenue
Sunnyvale, CA 94085 U.S.A.
Phone No.: (408) 746-6000
You can also find more information on this at
"http://www.fujitsu.com/fts/about/fts/environment-care/".
10 Fujitsu
Getting started
Mounting the monitor base
Do not remove the retaining splint until you have secured the base plate on
the monitor and moved it into the operating position.
1
2
►Insert the base plate on the foot (1).
►Secure the base plate with the screw (2).
►Place the monitor in the operating position.
14 Fujitsu

Produkspesifikasjoner

Merke: Fujitsu
Kategori: Følge
Modell: B24W-7 LED

Trenger du hjelp?

Hvis du trenger hjelp med Fujitsu B24W-7 LED still et spørsmål nedenfor, og andre brukere vil svare deg


Følge Fujitsu Manualer

Fujitsu

Fujitsu B24W-7 LED Bruksanvisning

13 Desember 2024

Følge Manualer

Nyeste Følge Manualer

Asus

Asus VA279QGS Bruksanvisning

9 April 2025
Acer

Acer EV227Q Bruksanvisning

9 April 2025
BenQ

BenQ PD3226G Bruksanvisning

8 April 2025
BenQ

BenQ DesignVue PD2730S Bruksanvisning

8 April 2025
Philips

Philips 221V8LB Bruksanvisning

5 April 2025
Gigabyte

Gigabyte MO27U2 Bruksanvisning

5 April 2025
Extron

Extron TLS 1025M Bruksanvisning

3 April 2025
PureTools

PureTools PT-SCREEN-100 Bruksanvisning

2 April 2025
Satco

Satco S11969 Bruksanvisning

31 Mars 2025
Satco

Satco S13163 Bruksanvisning

31 Mars 2025