GoldAir GCT430 Bruksanvisning
GoldAir
varmeaparat
GCT430
Les nedenfor 📖 manual på norsk for GoldAir GCT430 (5 sider) i kategorien varmeaparat. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/5
Operating Instructions
Electronic Ceramic Tower Heater
Model: GCT430
Thank you for choosing a Goldair Ceramic Fan Heater. This Goldair Heater has been
designed and manufactured to high standards of engineering and with proper use and
care, as described in this leaflet, will give you years of useful service. Please read
these instructions carefully.
General Care and Safety Guide
TECHNICAL SPECIFICATION
Model No: GCT430
Supply: 220-240VAC 50Hz
Wattage: 2000W
1. Use only the voltage specified on the rating
label of the appliance.
2. Keep all objects at least 1 metre from the front,
sides and rear of the appliance. Do not place
appliance close to radiant heat source.
3. Do not operate in areas where petrol, paint or
other flammable liquids are used or stored.
4. Do not insert or allow foreign objects to enter
any ventilation or exhaust opening, as this may
cause an electric shock, fire or damage to the
appliance. Do not sit on the appliance.
5. Do not operate this appliance with a damaged
cord, plug or after the appliance malfunctions or
has been dropped or damaged in any manner.
Return to a qualified electrical person for
examination, electrical service or repair.
6. This appliance is intended for household use
only and not for commercial or industrial use.
7. Use this appliance only as described in this
manual. Any other use is not recommended by
the manufacturer and may cause fire, electrical
shock or injury.
8. The common cause of overheating is deposits
of dust or fluff in the appliance. Ensure these
deposits are removed regularly by unplugging
the appliance and vacuum cleaning the air
vents and grills.
9. Do not use abrasive cleaning products on this
appliance. Clean with a damp cloth (not wet)
rinsed in hot soapy water only. Always remove
plug from the mains supply before cleaning.
10. Do not connect the appliance to mains supply
until completely assembled and adjusted.
11. Switch off and use handle provided when
moving.
12. Do not operate with cord set coiled up as a heat
build up is likely, which could be sufficient to
become a hazard.
13. It is recommended that this heater is plugged
directly into the wall socket. Power boards are
not rated to supply power to high wattage
appliances.
14. A correctly specified, undamaged extension
cord may be used with this heater provided it is
used in a safe manner.
15. Do not remove plug from power socket until the
appliance has been switched off.
16. Do not remove plug from power socket by
pulling cord; always grip plug.
17. Always unplug appliance when not in use.
18. Do not locate the heater directly below any
power socket during operation.
19. Do not twist, kink or wrap the cord around the
appliance, as this may cause the insulation to
weaken and split. Always ensure that all cord
has been removed from any cord storage area
and is unrolled before use.
20. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge, unless they are
supervised or have been given instruction
concerning the use of the appliance by a
person responsible for their safety.
21. Do not use this appliance in the immediate
surrounds of a bath, a shower, or a swimming
pool or other liquids. The appliance must not
be immersed in any liquids.
22. When the appliance has been unpacked,
check if for transport damage and ensure all
parts have been delivered. If parts are missing
or the appliance has been damaged, contact
the Goldair Customer Services Team.
23. If your appliance does not work, or is not
working properly, contact the place of purchase
or the Goldair Customer Services Team.
Repair work on the appliance by unqualified
persons can cause serious risk to the user.
24. There are no user serviceable parts installed in
the unit.
25. Do not place the unit in wardrobes or other
enclosed spaces as this may cause fire
hazards.
26. This unit is not supposed to be used in or
around locations where foodstuffs, works of art
or delicate articles of science, etc are stored.
27. Indoor use only.
28. Children should be supervised to ensure that
they do not play with the appliance.
29. Ensure heater is on a flat, stable, heat-
resistant surface.
30. It is important that you do not cover this heater.
WARNING Keep all objects at least 1 metre from
the front, sides and rear of the appliance.
Note: When the heater is turned on for the first
time, it may release a slight, odour or smoke.
This odour or smoke is a normal occurrence
caused by the initial heating of the internal
heating elements and should not occur again.
OPERATION
Check that the Power Switch at the back of the
heater is set to the Off position before plugging
the heater in and turning on the mains supply.
Turn the Power Switch at the back of the heater
to the “I” position. You will hear a beep.
Press the Power button on the control panel to
turn the heater on. The LED will display the
current room temperature and begin to blow out
air on Low Heat mode.
To turn the unit off, press the Power Button on
the control panel and then turn the Power Switch
at the back of the heater to “O” position.
Please note: the fan will continue to run even
though the elements have switched off. This is
normal.
THERMOSTAT
Press the arrow up or arrow down buttons to
adjust the temperature to your desired setting
(from 15-35°C). Once you have set the desired
temperature, the LED will display the room
temperature again and will rise as the room
temperature increases.
Once the heater reaches the set temperature it
will cycle on and off to maintain the set
temperature.
MODE
Press Mode button once for High heat, twice for
Fan Only and a third time to go back to Low
Heat.
For greater economy, use the High Heat setting
initially and then switch to the Low Heat setting.
For the Low and High Heat settings the fan
remains at the same speed; only the element
changes to create the greater/lesser heat output.
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. This appliance requires no installation, it should be used solely as
a portable appliance.
OSCILLATION
The “OSC” button turns the heater oscillation
function on and off.
TIMER
The timer function allows you to set the length of
operation time before the unit shuts Off.
When the heater is On, press the Timer button.
The timer icon will display on the control panel
and the amount of time remaining before the unit
switches Off will be displayed.
Set the amount of time before shutdown by
pressing the Timer button one or more times. The
set time will increase by one hour increments to a
maximum of 9 hours.
The control panel will return to display the current
mode setting and the symbol to indicate you have
set the timer will display on the screen. When the
programmed time as been reached the heater will
turn off.
To cancel the timer, increase the set time to 9
hours and then press the Timer button again. The
timer symbol will disappear from the screen.
REMOTE CONTROL
The remote control buttons perform the same
functions as those on the control panel of the unit.
For best results, aim the remote directly at the
remote sensor on the front panel of the heater.
The remote has a 3 metre range of operation.
The remote control requires two “AA" type battery
(not included).
IMPORTANT! NEVER COVER THIS HEATER!
CAUTION: The Heater generates heat during
use. Proper precautions must be taken to
prevent the risk of burns, scalds, fires or other
damage to persons.
Do not use this heater with a programmer,
remote-control system, separate timer or any
other device that switches the heater on
automatically.
Do not attempt to dismantle the heater. There are
no user serviceable parts. For service or repair,
contact an authorised electrical service
technician.
Operating your Ceramic Tower Heater
Produkspesifikasjoner
| Merke: | GoldAir |
| Kategori: | varmeaparat |
| Modell: | GCT430 |
Trenger du hjelp?
Hvis du trenger hjelp med GoldAir GCT430 still et spørsmål nedenfor, og andre brukere vil svare deg
varmeaparat GoldAir Manualer
3 September 2025
3 September 2025
3 September 2025
3 September 2025
3 September 2025
3 September 2025
3 September 2025
3 September 2025
2 September 2025
2 September 2025
varmeaparat Manualer
- varmeaparat MSW
- varmeaparat Thomson
- varmeaparat Whirlpool
- varmeaparat Danby
- varmeaparat EBERLE
- varmeaparat Domo
- varmeaparat AEG
- varmeaparat Kogan
- varmeaparat SereneLife
- varmeaparat Orbegozo
- varmeaparat NEO Tools
- varmeaparat Gorenje
- varmeaparat Olimpia Splendid
- varmeaparat Sencor
- varmeaparat EMOS
- varmeaparat Taurus
- varmeaparat Dimplex
- varmeaparat Bromic
- varmeaparat Master
- varmeaparat Einhell
- varmeaparat Blaze
- varmeaparat Nedis
- varmeaparat Chauvet
- varmeaparat ECG
- varmeaparat Princess
- varmeaparat Wilfa
- varmeaparat Eurolite
- varmeaparat Innoliving
- varmeaparat Fagor
- varmeaparat Cadel
- varmeaparat Perfect Aire
- varmeaparat Argoclima
- varmeaparat Izzy
- varmeaparat Broan
- varmeaparat Eurom
- varmeaparat Ardes
- varmeaparat King
- varmeaparat Ravanson
- varmeaparat Parkside
- varmeaparat Sonnenkonig
- varmeaparat Yamazen
- varmeaparat Stiebel Eltron
- varmeaparat Qlima
- varmeaparat SHX
- varmeaparat Rinnai
- varmeaparat Backyard Pro
- varmeaparat XPower
- varmeaparat Grunkel
- varmeaparat Trotec
- varmeaparat Heylo
- varmeaparat Blumfeldt
- varmeaparat Mestic
- varmeaparat Fire Sense
- varmeaparat Plus More
- varmeaparat Prismate
- varmeaparat Lavex
- varmeaparat Powr-Flite
Nyeste varmeaparat Manualer
3 September 2025
2 September 2025
2 September 2025
2 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025