Harman Kardon AVR 1600 Bruksanvisning

Harman Kardon Mottaker AVR 1600

Les nedenfor 📖 manual på norsk for Harman Kardon AVR 1600 (52 sider) i kategorien Mottaker. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/52

AVR 1600

AUDIO/VIDEO RECEIVER

OWNER’S MANUAL

inTRODUCTiOn

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. The A/V receiver’s cabinet may be cleaned by gently wiping with a soft

cotton or microfiber cloth. Do not use water or any liquid cleaners.

7. Do not block any of the ventilation openings. Install in accordance with

the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or the third prong is provided for your safety. When the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly

at plugs, convenience receptacles and the point where they exit from

the apparatus.

11. Only use the attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing

is required when the apparatus has been damaged in any

way, such as power supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

Wet Location Marking

Apparatus shall not be exposed to dripping or splashing and no objects

filled with liquids, such as vases, shall be placed on the apparatus.

Service Instructions

CAUTION – These servicing instructions are for use by qualified service

personnel only. To reduce the risk of electric shock, do not perform any

servicing other than that contained in the operating instructions, unless

you are qualified to do so.

Outdoor Use Marking

WARNING – To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

SAFETY inFORMATiOn

IMPORTANT SAFETY INFORMATION

Verify Line Voltage Before Use

Your AVR 1600 has been designed for use with 120-volt AC current.

Connection to a line voltage other than that for which it is intended can

create a safety and fire hazard and may damage the unit.

If you have any questions about the voltage requirements for your specific

model, or about the line voltage in your area, contact your selling dealer

before plugging the unit into a wall outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord attached to your unit.

We do not recommend that extension cords be used with this product. As

with all electrical devices, do not run power cords under rugs or carpets or

place heavy objects on them. Damaged power cords should be replaced

immediately by an authorized service center with a cord meeting factory

specifications.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC outlet, always pull the

plug; never pull the cord. If you do not intend to use the unit for any

considerable length of time, disconnect the plug from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable components inside this product. Opening the

cabinet may present a shock hazard, and any modification to the product

will void your warranty. If water or any metal object such as a paper clip,

wire or staple accidentally falls inside the unit, disconnect it from the AC

power source immediately, and consult an authorized service center.

CATV or Antenna Grounding

If an outside antenna or cable system is connected to this product, be

certain that it is grounded so as to provide some protection against voltage

surges and static charges. Section 810 of the National Electrical Code,

ANSI/NFPA No. 70-1984, provides information with respect to proper

grounding of the mast and supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of grounding conductors, location

of antenna discharge unit, connection to grounding electrodes and

requirements of the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER: This reminder is provided

to call the CATV (cable TV) system installer’s attention to article 820-40 of

the NEC, which provides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the grounding system

of the building, as close to the point of cable entry as possible.

Installation Location

• To ensure proper operation and to avoid the potential for safety hazards,

place the unit on a firm and level surface. When placing the unit on a

shelf, be certain that the shelf and any mounting hardware can support

the weight of the product.

• Make certain that proper space is provided both above and below the

unit for ventilation. If this product will be installed in a cabinet or other

enclosed area, make certain that there is sufficient air movement within

the cabinet. Under some circumstances, a fan may be required.

• Do not place the unit directly on a carpeted surface.

• Avoid installation in extremely hot or cold locations, or in an area that is

exposed to direct sunlight or heating equipment.

• Avoid moist or humid locations.

• Do not obstruct the ventilation slots on the top of the unit, or place

objects directly over them.

• Due to the weight of the AVR 1600 and the heat generated by the

amplifiers, there is the remote possibility that the rubber padding on the

bottom of the unit’s feet may leave marks on certain wood or veneer

materials. Use caution when placing the unit on soft woods or other

materials that may be damaged by heat or heavy objects. Some surface

finishes may be particularly sensitive to absorbing such marks, due to a

variety of factors beyond our control, including the nature of the finish,

cleaning materials used, and normal heat and vibration caused by the

use of the product, or other factors. We recommend that caution be

exercised in choosing an installation location for the component and in

normal maintenance practices, as your warranty will not cover this type of

damage to furniture.

Cleaning

When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary,

and only after unplugging the AC power cord, wipe it with a soft cloth

dampened with mild soapy water, then a fresh cloth with clean water. Wipe

it dry immediately with a dry cloth. NEVER use benzene, aerosol cleaners,

thinner, alcohol or any other volatile cleaning agent. Do not use abrasive

cleaners, as they may damage the finish of metal parts. Avoid spraying

insecticide near the unit.

Moving the Unit

Before moving the unit, be certain to disconnect any interconnection cords

with other components, and make certain that you disconnect the unit from

the AC outlet.

Important Information for the User

This equipment has been tested and found to comply with the limits for a

Class-B digital device, pursuant to Part 15 of the FCC Rules. The limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate

radio-frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communication.

However, there is no guarantee that harmful interference will not occur in

a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept interference received,

including interference that may cause undesired operation.

NOTE: Changes or modifications may cause this unit to fail to comply with

Part 15 of the FCC Rules and may void the user’s authority to operate the

equipment.

UNPACKING

The carton and shipping materials used to protect your new receiver during

shipment were specially designed to cushion it from shock and vibration.

We suggest that you save the carton and packing materials for use in

shipping if you move, or should the unit ever need repair.

To minimize the size of the carton in storage, you may wish to flatten

it. This is done by carefully slitting the tape seams on the bottom and

collapsing the carton. Other cardboard inserts may be stored in the same

manner. Packing materials that cannot be collapsed should be saved along

with the carton in a plastic bag.

If you do not wish to save the packaging materials, please note that the

carton and other sections of the shipping protection are recyclable. Please

respect the environment and discard those materials at a local recycling

center.

It is important that you remove the protective plastic film from the front-

panel lens. Leaving the film in place will affect the performance of your

remote control.

Produkspesifikasjoner

Merke:	Harman Kardon
Kategori:	Mottaker
Modell:	AVR 1600

Trenger du hjelp?

Hvis du trenger hjelp med Harman Kardon AVR 1600 still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Mottaker Harman Kardon Manualer

Harman Kardon AVI200 Bruksanvisning

10 September 2025

Harman Kardon AVR 700 Bruksanvisning

9 September 2025

Harman Kardon CA215 Bruksanvisning

9 September 2025

Harman Kardon AVR 110 Bruksanvisning

9 September 2025

Harman Kardon CA70 Bruksanvisning

9 September 2025

Harman Kardon AVR 2650 Bruksanvisning

9 September 2025

Harman Kardon AVR 138 Bruksanvisning

9 September 2025

Harman Kardon AVR 320 Bruksanvisning

8 September 2025

Harman Kardon AVR 370 Bruksanvisning

8 September 2025

Harman Kardon CA240 Bruksanvisning

8 September 2025

Mottaker Manualer

Nyeste Mottaker Manualer

Hughes & Kettner 15 DFX Bruksanvisning

22 September 2025

InLine 99204I Bruksanvisning

22 September 2025

Cambridge Edge M Bruksanvisning

22 September 2025

Cambridge 351R Bruksanvisning

22 September 2025

Cambridge Evo 150 Bruksanvisning

21 September 2025

Cambridge Azur 540P Bruksanvisning

21 September 2025

Cambridge Azur 851E/W Bruksanvisning

21 September 2025

Rocketfish RF-RBREC Bruksanvisning

21 September 2025

Cambridge CXA81 Bruksanvisning

21 September 2025

Cambridge CXR200 Bruksanvisning

21 September 2025