Havis C-DMM-120 Bruksanvisning

Les nedenfor 📖 manual på norsk for Havis C-DMM-120 (7 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 22 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/7
C-DMM-120_INST_7-12 rev 9-13
INSTALLATION INSTRUCTIONS
C-DMM-120
2011-2017 FORD EXPLORER (RETAIL)
SWING-OUT DASH MONITOR MOUNT
***Does NOT work in the Ford Interceptor Utility vehicle***
Always!
Read all instructions before installing any Havis, Inc. products.
Check for obstructions (Wires, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
The Dash Monitor Mount bracket system requires two or three main parts that are sold
separately. See web site Monitor Configurator for more detailed bracket information.
http://www.havis.com/monitor_mounts.htm
1 - Vehicle Specific dash mount bracket. (C-DMM-123)
1 - Computer Specific Monitor adaptor bracket. (C-MM-200 series)
1 - Offset adaptor bracket. (C-MM-301)
The C-MM-301 offset adaptor goes between the C-DMM-123 and C-MM-2XX.
It may not be required in some applications.
Docking stations for tablet applications can be bolted directly to C-DMM without adaptor. Offset
adaptor C-MM-303 is available if additional positioning options are desired for docking station.
TOOLS REQUIRED:
• Ratchet Wrench Air Saw or Plastic cutting tool
• Socket Set Dash panel removal tool
• Open End Wrench - 7/16” File
• Phillips Screwdriver
HARDWARE and PARTS:
QTY: DESCRIPTION: PART #:
1 Main Frame Assembly CM004267
1 Upper Support Bracket Driver Side CM004263
1 Upper Support Bracket Passenger Side CM004264
1 Lower Support Bracket Driver Side CM004265
1 Lower Support Bracket Passenger Side CM004266
4 1/4" Serrated Flange Hex Nut GSM30023
4 # 10 x 1/2" Phillips Pan head machine screw GSM33118
4 # 10 Star Washer GSM31034
1 Monitor Adapter Hardware Varies (monitor specific)
Note: The swing door utilizes a gas spring to assist in opening the door and to eliminate the possibility of it
slamming shut. If additional damping is desired because of heavier equipment, an optional stronger gas spring is
available under Part Number CM86662-30 (sold separately)
Installer must change out gas spring as needed
C-DMM-120_INST_7-12 rev 9-13
CM004263 Upper Support Bracket
Driver Side
CM004265 Lower Support Bracket
Driver Side
C-MM-301
Offset adaptor
C-MM-201
Monitor Mount Adaptor
(VESA bracket shown)
CM004267 Main frame for Retail
Explorer
C-DMM-120_INST_7-12 rev 9-13
View of Retail Ford Explorer dash instrument panel.
Note: Many of the photos in these instructions show a Ford
Interceptor Utility application, however the mounting
procedure is the same for both vehicles.
Carefully remove (unsnap) passenger side
Dash trim bezel. Trim removal tool and 90° picking
tool recommended.
Unplug and remove center control panel
Attach driver and passenger side upper support
bracket with OEM display screws. Driver side shown.
Torque to 3 Nm (27 in-lbs)
Remove screws holding center control panel.
(7mm socket)
Carefully remove (unsnap) driver side
Dash trim bezel.

Produkspesifikasjoner

Merke: Havis
Kategori: Ikke kategorisert
Modell: C-DMM-120

Trenger du hjelp?

Hvis du trenger hjelp med Havis C-DMM-120 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Havis Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer