Honeywell CT51N1007/E1 Bruksanvisning

Honeywell Termostat CT51N1007/E1

Les nedenfor 📖 manual på norsk for Honeywell CT51N1007/E1 (16 sider) i kategorien Termostat. Denne guiden var nyttig for 30 personer og ble vurdert med 3.9 stjerner i gjennomsnitt av 15.5 brukere

Side 1/16
Owners Manual
English: Page 1
Mode d’emploi
Français : Page 6
Manual de Uso
Español: Página 11
CT50 Series Thermostat
® U.S. Registered Trademark. Patents pending.
Copyright © 2019 Honeywell International Inc.
All rights reserved.
Read and save these instructions
M23786
MERCURY NOTICE
If your old thermostat contains
mercury, contact your local waste
management authority for proper
disposal instructions.
TURN OFF POWER at heating/cooling system (or fuse/circuit-breaker panel).
Remove cover and thermostat, but leave wallplate with wires attached.
Temperature Control Range
45°–95°F (7°–35°C)
35°–85°F (2°–29°C); select models; for garages or other outbuildings.
Is there a sealed tube containing mercury?
If so, see mercury notice below.
Leave wallplate in place.
Old thermostat Cover
Check package contents:
Thermostat
Wall anchors & screws (2 each)
Wire labels
Before you begin, make sure you have:
No. 2 Phillips & small pocket
screwdrivers
Hammer
Level (optional)
Pencil
Drill and bit (3/16” for drywall, 7/32” for
plaster)
Getting started
Remove your old thermostat
Vertical Mount:
CT50 (24 Vac heating systems)
CT51 (24 Vac heating and cooling systems)
CT53 (750 mV or 12Vdc heating systems)
Horizontal Mount:
CT54 (24 Vac heating systems)
CT55 (24 Vac heating and cooling systems)
69-2040EFS-04

Produkspesifikasjoner

Merke: Honeywell
Kategori: Termostat
Modell: CT51N1007/E1

Trenger du hjelp?

Hvis du trenger hjelp med Honeywell CT51N1007/E1 still et spørsmål nedenfor, og andre brukere vil svare deg