Hydra Kool KFM-GL-40 Bruksanvisning

Les nedenfor 📖 manual på norsk for Hydra Kool KFM-GL-40 (14 sider) i kategorien Kjøleskap. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/14
Safety Information
This device may only be repaired by the authorised technical assistance service
using
original parts and
components.
Before starting any maintenance operation, including replacement bulbs or
cleaning, always
disconnect the equipment from the power circuit, removing the
plug
from the socket.
Connect the equipment into a grounded outlet
If the
power cord is damaged, it may only be replaced by the manufacturer, by
its after-sales
service or by persons properly qualified and recognized in order to
avoid danger.
Do not introduce volatile, inflammable or explosive liquids into the unit.
The device should not be used by persons (including children) with reduced
physical, sensory or mental abilities, by inexperienced individuals or by anyone
who is not familiar with the product. These
individuals should at least be
supervised by someone who assumes
responsibility for their safety
or who has
received preliminary instructions relating to operation of the device.
Do not allow children to play with the appliance.
In
case of heated cabinets:
- There is equipotential bonding which is designed to match or
approximate the potential of the installation's mass or metal parts, not
intended to conduct electrical current.
This
device
is equipped with an
equipotential terminal for this purpose. The equipotential terminal is
marked with the symbol next to it and allows the connection of
conductors with
a
minimum section of 10 mm
2
.
-
Be careful of
contact with the equipment since this works at high
temperatures. The
symbol has the goal of indicating the hot
surfaces
of the
equipment.
We reject any kind of responsibility if these rules are not followed.
EN
KFM-GL-40 60 80-S
INSTRUCTION MANUAL
Printed 05/2020
sales@mvpgroupcorp.com www.mvpgroupcorp.com
5659 Royalmount Avenue
Montreal, Qc, Canada H4P 2P9
Tel.: 514.737.9701 / Toll Free: 888.275.4538
Fax.: 514.342.3854 / Toll Free: 877.453.8832
3560 NW 56th Street
Fort Lauderdale, FL 33309
Tel.: 786.600.4687
/ Toll Free: 844.218.8477
Fax.: 786.661.4100
EN
Table of Contents
1. GENERAL ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 3
PACKAGING ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 3
UNPACKING •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 3
PACKAGING AFTER USE••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 3
LOCATION •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
4
HANDLING •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4
ELECTRICAL PREVENTION •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 5
LOADING •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 5
MAINTENANCE ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 6
REPLACEMENT OF BULBS••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 7
EMERGENCY SITUATIONS ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 7
2. REFRIGERATED EQUIPMENT .................................................................................. 8
EQUIPMENT WITH REMOTELY ASSEMBLED CONDENSING UNIT •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 8
WATER CONDENSERS ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 9
COMMANDS •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 9
OPERATING TEMPERATURES•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 10
CLASSES OF TEST PACKAGES ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 10
CLIMATE CLASSES •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 11
RECYCLING •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 11
MOST COMMON PROBLEMS •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 12
COMMANDS •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 13
OPERATING TEMPERATURES ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 13
MOST COMMON PROBLEMS •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 13
DATA PARAMETERS................................................................................................................................................14
2
1. General
Packaging
All equipment is supplied with packaging, to prevent
damage during transport. The packaging consists of a
wooden palette, which serves as a base, and bubble
wrap surrounding the appliance, to protect it from bad
weather and possible knocks and bumps.
These devices can be packed in wooden crates upon
costumer request, thus yielding greater protection and
the ability to
stack.
Always
follow
the directions on the
packaging.
Unpacking
Remove the bubble wrap surrounding the equipment
and, with the help of pallet trucks, lift it up and remove
the wooden pallet.
Verify the integrity of the equipment and if there is a
label of features. If you have any concerns or suspect
some anomaly, do not use the equipment and contact
your dealer.
Packaging after use
When it is expected that the equipment will not be
used
during long periods, it should be
stored in its
original container, in an appropriate place, and
protected from bad weather.
To avoid corrosion and to better preserve the
appliance, before packing it, it should be washed in
lukewarm water with 5% neutral detergent and
afterwards dried with a soft cloth. You must also clean
the condenser, with the help of a soft brush and a
vacuum cleaner.
EN
3

Produkspesifikasjoner

Merke: Hydra Kool
Kategori: Kjøleskap
Modell: KFM-GL-40

Trenger du hjelp?

Hvis du trenger hjelp med Hydra Kool KFM-GL-40 still et spørsmål nedenfor, og andre brukere vil svare deg




Kjøleskap Hydra Kool Manualer

Kjøleskap Manualer

Nyeste Kjøleskap Manualer