I-PRO WV-S8543L Bruksanvisning

I-PRO Overvåkingskamera WV-S8543L

Les nedenfor 📖 manual på norsk for I-PRO WV-S8543L (24 sider) i kategorien Overvåkingskamera. Denne guiden var nyttig for 21 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/24

Precautions 2 ........................................................

About notations 3 ..................................................

Open Source Software 3 .......................................

Trademarks and registered trademarks 3 ...............

Precautions for installation 3 ..................................

Troubleshooting 3 ..................................................

Specifications 4 .....................................................

Optional accessories 4 ..........................................

Standard accessories 4 .........................................

Other items that are needed (not included) 4 .........

Installation Procedure 5 .........................................

Contents

About the user manuals

Product documentation is composed of the following documents.

•

Installation Guide (this document): Provides information about “Precautions”,

“Precautions for installation” and the installation method.

•

Basic Information (Refer to the link on the following support website): Provides

information about “Precautions for use” and “Detail specifications”.

•

Operating Instructions (Refer to the link on the following support website):

Explains how to perform the settings and how to operate this camera.

https://i-pro.com/global/en/surveillance/training-support/documentation-database-list

Model No.

WV-S8574L,WV-S8573L

WV-S8564L,WV-S8563L

WV-S8544L,WV-S8543L

WV-S8544,WV-S8543

av0322-2032

PGQP3398XA

Included Installation Instructions

Network Camera

For professional use only Outdoor use

"<Control No.: C****>" used in these documents should be used to search for information

on our technical information website (https://i-pro.com/global/en/surveillance/training-

support/support/technical-information) and will guide you to the right information.

WV-S8574L

• Before attempting to connect or operate this product, please read these instructions

carefully and save this manual for future use.

• microSDXC/ microSDHC/ microSD memory card is described as microSD memory card.

• The external appearance and other parts shown in this manual may differ from the actual product within the

scope that will not interfere with normal use due to improvement of the product.

For U.S. and Canada:

i-PRO Americas Inc.

https://www.i-pro.com/

For Europe and other countries:

i-PRO Co., Ltd. Fukuoka, Japan

https://www.i-pro.com/

i-PRO EMEA B.V. UK Branch

1010 Cambourne Business Park,

Cambridgeshire CB23 6DP

Authorised Representative in EU:

i-PRO EMEA B.V.

Laarderhoogtweg 25, 1101 EB

Amsterdam, Netherlands

Installation Guide

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean that used

electrical and electronic products and batteries must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to

applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential

negative effects on human health and the environment.

For more information about collection and recycling, please contact your local authority.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol)

This symbol might be used in combination with a chemical symbol. In this case it complies with the

requirement set by the Directive for the chemical involved.

NOTE: This equipment has been tested and found to

comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference when the equipment is

operated in a commercial environment. This equip-

ment generates, uses, and can radiate radio frequen-

cy energy and, if not installed and used in accor-

dance with the instruction manual, may cause harm-

ful interference to radio communications.

Operation of this equipment in a residential area is

likely to cause harmful interference in which case the

user will be required to correct the interference at his

own expense.

FCC CAUTION: Changes or modifications not

expressly approved by the party responsible for com-

pliance could void the user's authority to operate the

equipment.

Supplier’s Declaration of conformity

Trade name : i-PRO

Model No. : WV-S8574L, WV-S8573L

WV-S8564L, WV-S8563L

WV-S8544L, WV-S8543L

WV-S8544, WV-S8543

Responsible Party :

i-PRO Americas Inc.

8550 Fallbrook Drive, Suite 200 Houston,

Texas 77064

Support Contact : 1-800-513-5417

For U.S.A.

CAN ICES-3(A)/NMB-3(A)

For Canada

The model number and serial number of this prod-

uct may be found on the surface of the unit.

You should note the model number and serial num-

ber of this unit in the space provided and retain this

book as a permanent record of your purchase to aid

identification in the event of theft.

Model No.

Serial No.

For U.S.A.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

For U.S.A.

Méthode d’installation Vis de fixation recommandée La capacité de traction minimale requise

Quand la caméra vidéo est directement

installée au plafond.

M4 × 16 mm {5/8 pouces}

/ 4 él.*

539 N {121 lbf}

* La longueur de la vis est un exemple lors de l’installation de la caméra au plafond ou sur un mur robuste d’une

épaisseur de 20 mm {25/32 pouces} ou plus.

■ Do not insert any foreign objects.

Fire or electrical shock may be caused if water or any foreign objects, such as metal objects, enter inside the unit.

Turn the power off immediately and contact qualified service personnel for service.

■ Do not use this product in an inflammable atmosphere.

Failure to observe this may cause an explosion resulting in injury.

■

Avoid installing this product in the locations where salt damage occurs or corrosive gas is produced.

Otherwise, the mounting portions will deteriorate and injury or accidents due to a fall of the product may occur.

■ Do not strike or give a strong shock to this product.

Failure to observe this may cause injury or fire.

■ Keep microSD memory cards away from infants and children.

Otherwise, they may swallow the cards by mistake.

In this case, consult a doctor immediately.

■ Do not hang down from this product or use this product as a pedestal.

Failure to observe this may cause injury or accidents.

■

Do not install this product on a place that is greatly influenced by wind.

Installation on a place where the wind speed is 60 m/s {approx. 134 mph} or more may cause a fall of the product

resulting in injury or accidents.

■ Do not sprinkle more water, exceeding the performance limit of waterproof with a high pressure

cleaning machine, etc.

Fire or electrical shock may be caused by immersion.

■ Do not attempt to disassemble or modify this product.

Failure to observe this may cause fire or electric shock. Consult the dealer for the repair or inspections.

■ Do not install or clean the camera, or touch this product, the power cable or the connected cables

during thunder storms.

Failure to observe this may cause electric shock.

■ Refer installation work to the dealer.

Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury,

or damage to the product.

Be sure to consult the dealer.

■ Stop the operation immediately when something is wrong with this product.

When smoke goes up from the product, the smell of smoke comes from the product, or the exterior of the product

has deteriorated, continued use will cause a fire or fall of the product resulting in injury, or damage to the product.

In this case, turn the power off immediately and contact qualified service personnel for service.

■ Select an installation area that can support the total weight.

Selecting an inappropriate installation surface may cause this product to fall down or topple over, resulting in

injury or accidents. Installation work shall be started after sufficient reinforcement.

Caution:

• The network camera is only intended for a connec-

tion to an ethernet or PoE+ network without routing

to the outside plant.

• This product has no power switch. Be sure to install

disconnect devices such as a circuit breaker to shut

down the main power of power supplying equip-

ment to this product.

• Before attempting to connect or operate this prod-

uct, please read these instructions carefully.

Notice:

• This product is not suitable for use in locations

where children are likely to be present.

• Do not install this product in locations where ordi-

nary persons can easily reach.

• This product is a professional equipment.

• For information about screws and other parts

required for installation, refer to the corresponding

section of this document.

Precautions

: Direct current symbol

WARNING:

• Operation of this product in a residential environment could cause radio interference.

■ Periodic inspections shall be conducted.

Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents.

Consult the dealer for the inspections.

■ The exclusively designed mount bracket shall be used.

Failure to observe this may cause a drop resulting in injury or accidents.

Use the exclusively designed mount bracket for installation.

■ The screws and bolts must be tightened to the specified torque.

Failure to observe this may cause a drop resulting in injury or accidents.

■ Turn the power off when do wiring of this product.

Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may cause fire.

■ Install this product in a location high enough to avoid people and objects from bumping the

product.

Failure to observe this may cause injury.

■ Do not install this product in locations subject to vibration.

Loosening of mounting screws or bolts may cause a fall of the product resulting in injury or accidents.

■ Correctly perform all wiring.

Short circuits in the wiring or incorrect wiring may cause fire or electrical shock.

■ The measures of protection against snowfall shall be taken.

Weight of snow may cause a fall of the product resulting in injury or accidents. Protect the product against

snowfall by installing it under eaves.

■ Install the product securely on an installation surface in accordance with the installation

instructions.

Failure to observe this may cause injury or accidents.

■ Turn the power off when cleaning this product.

Failure to observe this may cause injury.

■ Do not rub the edges of metal parts with your hand.

Failure to observe this may cause injury.

About notations

The following notations are used when describing the functions limited for specified models.

The functions without the notations are supported by all models.

Trademarks and registered trademarks

• Microsoft, Windows, Windows Media, Internet Explorer, Microsoft Edge, and ActiveX are either registered

trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

• Intel and Intel Core are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.

• Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe in the United States

and/or other countries.

• microSDXC Logo is a trademark of SD-3C, LLC.

• iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.

• Android and Google Chrome are trademark of Google LLC.

• Firefox is a trademark of the Mozilla Foundation in the US and other countries.

• The word "QR Code" is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

• All other trademarks identified herein are the property of their respective owners.

Precautions for installation

■ In order to prevent injury, the product must be securely mounted to an installation surface

according to Installation Guide.

■ Installation area for this product

Select an appropriate place for the installation area (such as a strong installation surface) in your particular environment.

• Make sure that the installation area is strong enough to hold this product, such as a concrete ceiling.

• Install the camera in the foundation area of the architecture or where sufficient strength is assured.

• Do not mount the product on a plaster board or a wooden section because they are too weak. If the product

is unavoidably mounted on such a section, the section shall be sufficiently reinforced.

■

Mounting method for this product.

This product is designed to be used as a pendant mount camera. If the product is mounted on a desktop or at a

slant, it may not work correctly and its lifetime may be shortened.

Open Source Software

• This product contains open source software licensed under GPL (GNU General Public License), LGPL (GNU

Lesser General Public License), etc.

• Customers can duplicate, distribute and modify the source code of the software under license of GPL and/or LGPL.

• For details concerning licensing and source code of open source software, click “Click here for OSS information”

on “Support” page of the setup menu of this product and read the displayed content.

• Please note that we shall not respond to any inquiries regarding the contents of the source code.

Except for open source software licensed under GPL/LGPL and so on, distributing, copying, disassembling,

reverse compiling and reverse engineering of the software provided with this product are all expressly prohibited.

In addition, exporting any software provided with this product violating export laws is prohibited.

i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising

out of improper installation or operation inconsistent with this

documentation.

The functions with this notation are available when using the model with the clear dome cover.

The functions with this notation are available when using the model with the smoke dome cover.

SS8

8857x

57x

57x57xL

WV-S85 4 , WV-S85 37 L 7 L

S85

S85S856xL

6xL

6xL6xL

WV-S85 4 , WV-S85 36 L 6 L

S8S85

554x

4x4xL

WV-S85 4 , WV-S85 34 L 4 L

S8S85

554x

4x4x

WV-S854 , WV-S8544 3

S8S85x4x

5x4x

5x4x5x4x

WV-S857 L, WV-S856 L, WV-S854 L, 444

WV-S8544

S8S85x3

5x3

5x35x3x

WV-S857 L, WV-S856 L, WV-S854 L, 333

WV-S8543

■ Do not place this product in the following places

• Locations where a chemical agent is used such as a swimming pool

• Locations subject to moisture or oil smoke such as a kitchen

• Locations that have a specific environment that is subject to an inflammable atmosphere or solvents

• Locations where a radiation, an X-ray, a strong radio wave or a strong magnetic field is generated

• Locations near coasts directly subjected to sea breezes, or locations subject to corrosive gases such as from

hot springs, volcanic regions, etc.

• Locations where the temperature is not within the specified range

• Locations subject to vibrations, such as on vehicles, marine vessels, or above product lines (This product is

not designed for on-vehicle use.)

•

Locations subject to condensation as the result of severe changes in temperature

• Locations near rubber products (packing, rubber feet, etc.)

■ Screw tightening

Do not use an impact driver. Use of an impact driver may damage the screws or cause tightening excessively.

■

Installing in low temperature environments

This product is equipped with an internal heater unit for use in cold climates. The heater unit turns on automati-

cally when the temperature inside the product drops below around 0°C {32 °F}.

S8S85

554x

4x4xL

LL S8

S8S85

554x

4x4x

When this product is installed and operated in low temperatures below –10 °C {14 °F}

S8S85

554x

4x4xL

LL S8

S8S85

554x

4x4x

–20 °C {–4 °F}

SS8

8857x

57x

57x57xL

LL S85

S85

S85S856xL

6xL

6xL6xL

, it may require time to start up since the camera will wait to be warmed up

internally by the internal heater right after the power is turned on. Also, the camera may not function properly, if it

is installed and operated in an environment where the temperature is below -25 °C {-13 °F}. In such a case, wait

approximately 2 hours or more until the camera is warmed up. Then, turn on the power again.

As the camera warms up, snow or frost accumulated on the front panel will melt. However, it may not be defrost-

ed from the cover depending on the ambient temperature or weather condition.

■ About reflection of light from outside or IR light

A ghost may appear on the screen depending on the incident angle of external light.



In the case of using the IR light, installation of a camera near a wall may cause reflection of infrared rays resulting

in a part of the screen or the entire screen turning whitish.

• Refer to our technical information website <Control No.: C0109> for image examples and measures to take.

■ Take notice of humidity

Install this product when the humidity is low. If installation is performed when it is raining or in very humid

conditions, the inside may be affected by humidity, causing mist-over inside the

dome cover

■ Protection from lightning

When cables are used outdoors, there is a chance that they may be affected by lightning. In such a case, install

a lightning arrestor close to the camera, and make the length of the network cable between the camera and

lightning arrestor as short as possible to prevent the camera from being affected by lightning.

■ When noise disturbance may happen

Noise may appear in video or audio near a strong electric field from a TV or radio antenna, motors and trans-

formers, or a strong electric field/magnetic field from a power line (lamp line) of AC100 V or more. Conduct the

power distribution work to keep 1 m {3.28 feet} away from them or conduct the electric conduit work using

metal pipes. (Be sure to make ground connection of the metal pipes.)

■ Make sure to remove this product if it will no longer be used.

■ This product has no power switch.

When turning off the power, disconnect the power supply from the PoE+ device.

■About the battery

A battery is installed inside the camera. Do not leave the battery exposed in environments of excessive heat as a

result of sunlight or fire.

■ Equipment classification and power source indication label

Refer to the indication label on the bottom side of this unit for the equipment classification, power source, and

other information.

■ About static electricity

Before installing or removing this product, be sure to touch metal objects to discharge static electricity from your body.

Troubleshooting

Before requesting service, refer to “Troubleshooting” of Basic Information and Operating Instructions. Then,

confirm the trouble.

Produkspesifikasjoner

Merke:	I-PRO
Kategori:	Overvåkingskamera
Modell:	WV-S8543L

Trenger du hjelp?

Hvis du trenger hjelp med I-PRO WV-S8543L still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Overvåkingskamera I-PRO Manualer

I-PRO WV-S15600-V2L Bruksanvisning

3 Januar 2025

I-PRO WV-X15500-V3L Bruksanvisning

17 Desember 2024

I-PRO WV-X15700-V2LN Bruksanvisning

17 Desember 2024

I-PRO WV-X22500-V3L Bruksanvisning

17 Desember 2024

I-PRO WV-S2536LA Bruksanvisning

17 Desember 2024

I-PRO WV-S2536LTA Bruksanvisning

17 Desember 2024

I-PRO WV-S25500-F3L Bruksanvisning

17 Desember 2024

I-PRO WV-S25500-F6L Bruksanvisning

17 Desember 2024

I-PRO WV-S25600-V2L Bruksanvisning

17 Desember 2024

I-PRO WV-S25500-V3L Bruksanvisning

17 Desember 2024

Overvåkingskamera Manualer

Nyeste Overvåkingskamera Manualer

Technaxx TX-192 Bruksanvisning

28 Januar 2025

Turing TRMRP164TB Bruksanvisning

25 Januar 2025

Turing TRMR64RB Bruksanvisning

25 Januar 2025

Turing TRMRP082TB Bruksanvisning

24 Januar 2025

Reolink RLK12-500WB4 Bruksanvisning

23 Januar 2025

Reolink Argus Track Bruksanvisning

23 Januar 2025

Reolink RLK16-1200D8-A Bruksanvisning

23 Januar 2025

Reolink FE-P Bruksanvisning

23 Januar 2025

Reolink Go Ranger PT Bruksanvisning

23 Januar 2025

Reolink Duo Floodlight PoE Bruksanvisning

23 Januar 2025