Kensington UH1460P Bruksanvisning

Kensington Annet datatilbehør UH1460P

Les nedenfor 📖 manual på norsk for Kensington UH1460P (6 sider) i kategorien Annet datatilbehør. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/6

Kensington UH1460P USB-C Mobile Dock.

1. Remove USB-C cable from storage pocket on front of the dock.

2. Plug the USB-C cable into the USB-C host port on the side of the dock labeled with the host device icon. Plug the other end of the USB-C cable into an available USB-C port on your host device.

The selected USB-C port should support both Alt Mode and Power Delivery.

3. Connect monitors and accessories. Use the two HDMI 2.0 ports on the back of the dock to connect your monitors.

The dock will deliver up to 4K @ 60Hz for a single monitor and up to 4K @30Hz for dual monitors on Windows devices.

Single monitor support is available for iOS/iPadOS and Samsung DeX (up to 4K @ 60Hz).

Note: macOS only supports dual video in mirror mode (not extended) up to 4K @ 60Hz.

Connect an external hard drive or other USB-C accessory using the USB-C 3.2 Gen 1 (5Gbps/5V/1.5A) port on the side of the dock labeled with the battery icon.

Connect phones, mice, keyboards, thumb drives, printers, and hard drives using the two USB-A 3.2 Gen1 (5Gbps/5V/1.5A) ports.

Plug your ethernet cable into the 1Gbps Ethernet port for stable high-speed internet/intranet connectivity.

o setup pass-through power, plug your laptop device’s USB-C power adapter into the USB-C PD Pass through port on the side of the dock labeled with the plug icon.

Note: The USB-C power adapter must supply at least 85W of Power Delivery.