Kenwood KMC-66 Bruksanvisning

Kenwood Mikrofon KMC-66

Les nedenfor 📖 manual på norsk for Kenwood KMC-66 (10 sider) i kategorien Mikrofon. Denne guiden var nyttig for 25 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 13 brukere

Side 1/10
HEADSET/ SPEAKER MICROPHONE/ CLIP MICROPHONE WITH EARPHONE
SIMPLE GUIDE
PRECAUTIONS
This product is exclusively for use with KENWOOD transceivers.
To prevent possible accidents and damages, do not attempt to use this product with other
types of transceivers.
Mishandling may cause the accidents and damages to this product. Please observe the
following prohibitive matters.
Do not expose the speaker/ microphone to long periods of direct sunlight, nor place it
close to heating appliances.
Do not drop the speaker/ microphone; strong impacts can damage the internal
components.
Do not over stress the speaker/ microphone cable by pulling on it with excessive force.
Keep the volume as low as possible to protect your hearing.
OPERATIONS
To Install
1 Turn the transceiver power OFF.
For transceivers that are able to adjust the volume level, adjust the volume to the
minimum setting before turning the transceiver power OFF.
2 Insert the plug into the speaker/microphone jacks on the transceiver.
3 Attach the microphone and earphone to the appropriate position.
4 Turn the transceiver power ON and adjust the volume level.
To Transmit
1 Press the PTT switch and speak into the microphone.
2 Release the PTT switch to return to receive mode.
B5A-1080-00
© 2015

Produkspesifikasjoner

Merke: Kenwood
Kategori: Mikrofon
Modell: KMC-66

Trenger du hjelp?

Hvis du trenger hjelp med Kenwood KMC-66 still et spørsmål nedenfor, og andre brukere vil svare deg