Kohler Gilford K-12700 Bruksanvisning
Les nedenfor 📖 manual på norsk for Kohler Gilford K-12700 (8 sider) i kategorien Synke. Denne guiden var nyttig for 27 personer og ble vurdert med 4.0 stjerner i gjennomsnitt av 14 brukere
Side 1/8
1017834-2-A
Kohler Co.
Español, Página 3
Français, Page 5
BEFORE YOU BEGIN
Observe all local plumbing
and building codes.
Inspect the waste and supply
tubing; replace if necessary.
Provide sucient wall
reinforcement to support at
least 300 lbs. (136.1 kg).
Prior to installation, unpack the
new sink and inspect it for
damage. Return the sink to its
protective carton until you are
ready to install it.
INSTALL THE NEW SINK
Rough-in the supplies and
drain according to the
roughing-in information
packed with the sink.
Install the wall brackets to the
reinforced wall according to
the roughing-in information
packed with the sink. Level
the wall brackets.
From the underside, install a
toggle bolt, metal washer,
rubber washer, and toggle to
each of the rear bracket
slots.
Position a washer over each
front bracket slot. Position
the tie bar across the front of
the wall bracket sections so it
rests on both washers.
Secure the tie bar in place
from the underside with a
bolt, nut, and washer through
each front bracket slot.
Toggle
Rubber
Washer
Wall
Bracket
Washer
Tie Bar
Washer
Bolt
Nut
Toggle Bolt
Metal
Washer
GILFORD VITREOUS
CHINA SCRUB-UP SINK
INSTALLATION
INSTRUCTIONS
Produkspesifikasjoner
| Merke: | Kohler |
| Kategori: | Synke |
| Modell: | Gilford K-12700 |
Trenger du hjelp?
Hvis du trenger hjelp med Kohler Gilford K-12700 still et spørsmål nedenfor, og andre brukere vil svare deg
Synke Kohler Manualer
30 Mars 2025
26 Mars 2025
Synke Manualer
Nyeste Synke Manualer
9 April 2025
8 April 2025
8 April 2025
2 April 2025
1 April 2025
4 Mars 2025
28 Januar 2025
28 Januar 2025
25 Januar 2025
25 Januar 2025