Lorex ETP-01 Bruksanvisning
Lorex
Ikke kategorisert
ETP-01
Les nedenfor 📖 manual på norsk for Lorex ETP-01 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 32 personer og ble vurdert med 3.5 stjerner i gjennomsnitt av 16.5 brukere
Side 1/2
Package
ETP-01T (Transmitter)
ETP-01R (Receiver)
Quick Start
Guide
Hardware Overview
Overview
ETP-01 Series are High-Speed, long distance Ethernet & PoE extender
that makes possible to transmit the Ethernet signal and PoE up to
300m through single pair of twisted wires.
It is cost-effective and time saving solution to migrate existing
analog system to IP based system since ETP-01 series support easy
installation utilizing the existing UTP bundle cables or any single
twisted pair cables.
With long distance transmission feature, the device makes to
overcome 100 meters distance limitation easily and reduces the
construction cost significantly compared with fiber optic configuration.
Features
Long reach Ethernet & PoE extension over existing 2-Wire twisted
cable
Data + Power over twisted cable
Data and PoE distance up to 300 m
100Mpbs Full Duplex
PoE, PoE+, Extra PoE (Max. 60W PoE output, ETP-01T model only
with DC Power adapter)
LED Indication (Data, Power)
Plug & Play
Surge Protection
Support PoE, PoE+ Input (25.5W) from PoE Switch / PoE NVR
(ETP-01R model only)
Slim design
Quick Start Guide
ETP-01T / ETP-01R
Please read carefully the instruction manual before use.
Contents of this manual are subject to change without prior
notice for reasons such as functionality enhancements.
Installation Guide
1. Connect Ethernet cable (Cat5e or better) from PoE Switch/NVR to
ETP-01R. Check LEDs on ETP-01R.
Ethernet cable
(Cat5e or better)
2-Wire Twisted cable
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
2. Connect single twisted pair cable to ETP-01R.
Connect single twisted pair cable from ETP-01R to ETP-01T.
Ethernet cable
(Cat5e or better)
2-Wire Twisted cable
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
3. Connect Ethernet cable (Cat5e or better) from ETP-01T to IP
Camera. Check LEDs on ETP-01T.
Î
Set ETP-01T, PoE Switch ON to supply direct power to IP camera.
Set ETP-01T, PoE Switch OFF to connect PC or network switch
devices.
Ethernet cable
(Cat5e or better)
2-Wire Twisted cable
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
LED Indicators
Indicator Color Function
LINK
Ethernet Data Act
ACT
Ethernet Connect Act
Attention polarity( , ).
Rev.4.0
Right
Left
Top
상태 표시등 상태 표시등
LINK
ACT
RJ45
DC 전원 어댑터Teminal 커넥터
제품 고정
나사용 홀
제품 고정
나사용 홀
PoE 스위치 ON/OFF
(ETP-01T 만 해당)
Status LED Indicator
LINK
Status LED Indicator
ACT
DC Power JackTeminal connector
PoE Switch ON/OF
(ETP-01T only)
Mounting
Screw Hole
Mounting
Screw Hole
Produkspesifikasjoner
| Merke: | Lorex |
| Kategori: | Ikke kategorisert |
| Modell: | ETP-01 |
Trenger du hjelp?
Hvis du trenger hjelp med Lorex ETP-01 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Lorex Manualer
23 August 2025
23 August 2025
22 August 2025
22 August 2025
11 August 2025
17 Februar 2025
31 Januar 2025
29 Januar 2025
29 Januar 2025
15 Januar 2025
Ikke kategorisert Manualer
- Texas
- GE
- EVE
- 2hp
- SolidDrive
- Bolin Technology
- Propellerhead
- MIOPS
- Baby Lock
- Physa
- Nuki
- Drayton
- Conair
- MARTOR
- Delonghi
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025