Luxman M-700u Bruksanvisning

Luxman Mottaker M-700u

Les nedenfor 📖 manual på norsk for Luxman M-700u (20 sider) i kategorien Mottaker. Denne guiden var nyttig for 27 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/20

Owne sr`

Manual

STEREO POWER AMPLIFIER

M-700u

Contents

Precautions 1 ·············································································································

Features of This Unit 2 ································································································

Names and Functions 4 ······························································································

Connections 8 ············································································································

Block Diagram 12 ·······································································································

Specifications 13 ········································································································

Before Asking for Repair Services 14 ··········································································

STEREO POWER AMPLIFIER M-700u

Precautions

Installation place

Install this unit in a location where good ventilation and heat

radiation is assured.

Especially, placing this unit where direct sunlight is present,

where the temperature rises excessively high such as close to

a heater, or where it is humid or dusty may cause a malfunc-

tion even if heat is efficiently released.

Ventilation holes

Do not block the ventilation holes of the top and bottom pan-

els. If the amplifier is installed on a rack or the like, secure

ample space for cooling and leave the door open. Do not pile

up other things on the amplifier and never put articles on it.

Failure to observe this may cause a malfunction.

Note:

For heat dispersal, do not install this equipment in a confined

space such as a book case or similar unit.

Precautions in connecting with other

components

When connecting this product with a control amplifier and

such, be sure to turn off the power of this product and all oth-

er connected devices. Failure to observe this may generate

a strong noise resulting in speaker damage or a malfunction.

The pin-plug to be inserted in each input terminal of this unit

shall be pushed in firmly. If the grounding terminal is inade-

quately connected, noises including hum may be generated,

resulting in an adverse S/N ratio.

Cautions in connecting speakers

When making speaker system connections, exercise extra

care not to short-circuit between and of the speaker ⊕ ⊖

terminals and speaker input terminals of this unit.

If a large signal is applied to the amplifier with its circuit left

short-circuited, a large current may be passed through the

output circuit and cause a malfunction.

The sound is not generated shortly after

the power supply is turned on.

This amplifier is equipped with a time muting circuit in order to

separate the output circuit. Therefore, no sound is generated

shortly after the power supply is turned on.

If the volume control is moved to a high sound level before

the time muting circuit is canceled, a large sound is suddenly

generated. Please be advised that the volume control of the

input device such as a control amplifier shall be set to a low

level at first and adjusted according to your taste after sound

comes out of the speakers.

Protection circuit

This product is equipped with a protection circuit that is ac-

tivated upon detection of overcurrent, abnormally high tem-

perature, and DC drift to protect the amplifier and speakers.

When the protection circuit is activated, the output to the

speaker terminal is shut off and the standby indicator lights

up to show that this product is in the standby state. Please

consult your dealer when the protection circuit is sometimes

activated even after turning off the switch, disconnecting the

power plug from the wall outlet, and connecting it again after

a while.

Repair and adjustment

When repair and adjustments are needed, please ask the

dealer where you bought the unit.

Cleaning

For cleaning, use a piece of soft cloth to wipe the unit such as

cleaning cloth. When the dirt is hard to remove, use a small

amount of neutral detergent to wipe, and then wipe the unit

with dry cloth. Do not use a solvent like benzine or thinner

because such a substance can often damage the exterior.

* Note

Wall

Exercise extra care when this unit is unpacked, assembled,

transported, and installed because this unit is heavy.

SAFETY CAUTIONS

CAUTION

Produkspesifikasjoner

Merke:	Luxman
Kategori:	Mottaker
Modell:	M-700u

Trenger du hjelp?

Hvis du trenger hjelp med Luxman M-700u still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Mottaker Luxman Manualer

Luxman E-250 Bruksanvisning

2 Januar 2025

Luxman EQ-500 Bruksanvisning

2 Januar 2025

Luxman C-900u Bruksanvisning

2 Januar 2025

Luxman M-900u Bruksanvisning

2 Januar 2025

Luxman L-507u Bruksanvisning

2 Januar 2025

Luxman L-550AX Bruksanvisning

2 Januar 2025

Luxman M-700u Bruksanvisning

2 Januar 2025

Luxman L-507uX MarkII Bruksanvisning

2 Januar 2025

Luxman C-700u Bruksanvisning

2 Januar 2025

Luxman L-595ASE Bruksanvisning

2 Januar 2025

Mottaker Manualer

Nyeste Mottaker Manualer

Cambridge AZUR 651R Bruksanvisning

16 September 2025

Cambridge CXA81 MKII Bruksanvisning

16 September 2025

Cambridge Azur 740A Bruksanvisning

16 September 2025

Cambridge Evo 75 Bruksanvisning

16 September 2025

Rolls MP222 Bruksanvisning

15 September 2025

Topping PA7 Bruksanvisning

15 September 2025

Topping DX3Pro+ Bruksanvisning

15 September 2025

Rolls BD87 Bruksanvisning

15 September 2025

Atlas AA35 Bruksanvisning

15 September 2025

Atlas AZA404 Bruksanvisning

14 September 2025