Max Rhapsody54 Bruksanvisning
Max
musikk instrument
Rhapsody54
Les nedenfor 📖 manual på norsk for Max Rhapsody54 (52 sider) i kategorien musikk instrument. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/52
Rhapsody 54 Keyboard 54-keys
Ref. nr.: 130.033
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
NÁVOD K POUŽITÍ
V1.0
ENGLISH
Congratulations to the purchase of this Max Music product. Please read this manual thoroughly prior to using the product in
order to benefit fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions
to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the
product. This may cause electrical shock and
malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet,
always pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the product on. Contact your dealer.
Do NOT connect the product to a rheostat or dimmer.
- To avoid fire and shock hazard, do not expose the
product to rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the product to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the product will not be used
for a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the product has not been used for a longer period of
time, condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the
product in humid rooms or outdoors.
- During operation, the housing may become hot.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the product on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Only operate the product with clean hands.
- Do not force the controls.
- If the product has fallen, always have it checked by a
qualified technician before you switch the product on
again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product off prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this product.
- Keep the original packing material so that you can
transport the product in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate
and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and
35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Max cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
UNPACKING INSTRUCTION
CAUTION! I Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to
drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might
damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
The label on the bottom of the product indicates to what type of power supply the product must be connected. Check that the
mains voltage corresponds to this, all other voltages may cause irreparable damage. The product must also be directly
connected to the mains, no dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
CONTROLS
1.
Press to turn the keyboard on/off.
2. MASTER VOLUME
Press the [MASTER VOL +/-] button to raise or lower the master volume.
3. ACCOMP VOLUME
There are 8 levels style accompaniment volume, the system default is 06, by pressing “+/-“ key accompaniment volume can
be adjusted. Press both simultaneously to reset to default value.
4. TRANSPOSE
Press the [TRANSPOSE +/-] button to transpose the tone of the notes. The transpose may be adjusted from “-6” to “+6”.
Pressing the two buttons simultaneously resets transpose to the default value.
5. TEMPO
Press the [TEMPO +/-] button to adjust the tempo for style, metronome and demo. There are total of 210 segments. The
adjusting range is 30 to 240. Pressing the two buttons simultaneously resets Tempo to the default value of 120.
6. SINGLE CHORD
Under the state that the Style is activated, press the [SINGLE] button. After “C-1” shows on the display, you can play a
single chord on the keys in the chord zone of the keyboard. Press the [SINGLE] button again or press the [CHORD CLEAR]
button, “OFF” will appear on the display. The single chord function will be disenabled.
7. FINGER CHORD
In this mode, you play the individual notes of the chord in your left hand. Under the state that the Style is activated, press the
[FINGER CHORD] button. After the “C-2” shows on the display, you can play a fingered chord on the keys in the chord zone
of the keyboard. Press the [FINGER CHORD] button again or press the [CHORD CLEAR] button, “OFF” will appear on the
display. The fingered chord function will be disenabled.
8. START/STOP
Press this button to start or stop playing selected program.
9. SYNC
Press the [SYNC] button to open the sync accompaniment function. Press the 19 keys on the left sync starting style; if the
chord function has been start, press this 19 key automatic chord will start simultaneously. If the style is playing, press this
button to stop the style and open the sync accompaniment function. If you have to start sync function. Press this button to
exit.
10. INTRO/ENDING
Press the [INTRO/ENDING] button to start play the prelude. Turn to regular Rhythm to continue. During the play of the
Rhythm press the [INTRO/ENDING] button to start playing a code for ending.
11. FILL IN
Press the [FILL IN] button while style is playing. This function can insert a bridge to enhance performance, and then
continue to the original tempo.
Produkspesifikasjoner
| Merke: | Max |
| Kategori: | musikk instrument |
| Modell: | Rhapsody54 |
Trenger du hjelp?
Hvis du trenger hjelp med Max Rhapsody54 still et spørsmål nedenfor, og andre brukere vil svare deg
musikk instrument Max Manualer
8 September 2025
8 September 2025
8 September 2025
8 September 2025
8 September 2025
8 September 2025
8 September 2025
8 September 2025
8 September 2025
8 September 2025
Max Manualer
9 September 2025
8 September 2025
8 September 2025
8 September 2025
8 September 2025
8 September 2025
8 September 2025
8 September 2025
8 September 2025
8 September 2025