Mellerware Biltong King BC002 Bruksanvisning

Mellerware Foodprosessor Biltong King BC002

Les nedenfor 📖 manual på norsk for Mellerware Biltong King BC002 (9 sider) i kategorien Foodprosessor. Denne guiden var nyttig for 20 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/9
makes life easier
BILTONG KING
biltong
cutter
Model:
BC002
complies with
INTERNATIONAL
IEC60335
Dear customer,
Thank you for choosing to purchase a Mellerware
brand product. Thanks to its technology, design and
operation and the fact that it exceeds the strictest qual-
ity standards, a fully satisfactory use and long product
life can be assured.
1. Parts description
1. Cutter blade
2. Cutting block
3. Tungsten-carbide sharpner
4. Spanner cavity
5. Spanner
2. Safety advice and warnings!
Read these instructions carefully before using the
appliance and keep them for future reference. Failure
to follow and observe these instructions could lead to
an accident. Clean all the parts of the product that will
be in contact with food, as indicated in the cleaning
section, before use.
2.1. Use or working environment:
2.1.1. Keep the working area clean and well lit. Clut-
tered and dark areas invite accidents.
2.1.2. Use the cutter in a well ventilated area.
2.1.3. Do not place the cutter on hot surfaces, such as
cooking plates, gas burners, ovens or similar items.
2.1.4. Keep children and bystanders away when using
this cutter.
2.1.5. Place the cutter on a horizontal, flat, stable
surface and away from other heat sources and contact
with water.
2.1.6. Do not use the appliance if it has fallen on the
floor or if there are visible signs of damage.
2.2. Personal safety:
2.2.1. WARNING - The blade of the cutter is extremely
sharp and could lead to serious injury is mishandled.
Avoid contact with the blade and exercise caution when
using the cutter.
2.2.2. This appliance is only for domestic use, not for
industrial or professional use. It is not intended to be
used by guests in hospitality environments such as
bed and breakfast, hotels, motels, and other types of
residential environments, even in farm houses, areas
of the kitchen staff in shops, offices and other work
environments.
2.2.3. This appliance is not intended for use by
persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance by
a person responsible for their safety.
2.2.5. This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
2.3. Use and care:
2.3.1. Do not use the cutter if the parts or accessories
are not properly fitted.
2.3.2. This appliance should be stored out of reach
of children.
2.4. Service:
2.4.1. Make sure that the appliance is serviced only
by suitably qualified technician, and that only original
spare parts or accessories are used to replace existing
parts/accessories.
2.4.2. Any misuse or failure to follow the instructions
for use renders the guarantee and the manufacturer’s
liability null and void.
3. Instructions for use
3.1. Before use:
3.1.1. Remove the appliance’s protective film(if ap-
plicable).
3.1.2. Before using the product for the first time, clean
in the manner described in the cleaning section.
2
1
3
4
5
3.2. Assembly:
3.2.1. A compact Spanner is stored within a cavity
at the rear of the raised wooden block. Remove the
spanner.
3.2.2. Attach the blade to the bolt extending from the
raised wooden block. Position a white nylon washer
on either side of the blade and then tighten the Nylon
fastening nut using the spanner provided. Re-position
the spanner within it’s storage cavity and your biltong
slicer is ready to use.
3.2.3. In cutting biltong or any other wide range of
food products, the upright rear block can be used as a
guide. Press the biltong (or other product) against the
guide and push towards the blade as you slice, while
carefully ensuring fingers are kept well clear of the
cutting edge.
3.2.4. The knife can be detached for independent use
and cleaning if required, and the wooden board can be
used with or without the attached knife.
3.3. Using the tungsten-carbide sharpener:
3.3.1. Ensure that the sharpener is placed on a stable
base when using, and hold the slicing knife handle with
the left hand to keep a steady grip on the unit. This
keeps the sharpener steady and your left hand well
clear of the blade being sharpened.
3.3.2. With your right hand, hold the knife in a vertical
position (at 90 degrees to floor or table-top) and using
slight downward pressure run the blade from it’s heel
to the tip through the slot.
3.3.3. Repeat this action 3 or 4 times, or more if
necessary until sharp.
3.3.4. After sharpening, clean the knife blade and dry
well before storing.
3.4. CAUTION IN USE OF YOUR TUNGSTEN-CARBIDE
SHARPENER:
3.4.1. Do not use the Tungsten Carbide sharpener to
sharpen serrated knives or scissors.
3.4.2. Do not use a backwards and forwards motion,
sharpen in one direction only.
3.4.3. Use only light pressure - do not apply extreme
force.
3.4.4. Do not put the sharpener or wooden block in a
dishwasher or submerge.

Produkspesifikasjoner

Merke: Mellerware
Kategori: Foodprosessor
Modell: Biltong King BC002

Trenger du hjelp?

Hvis du trenger hjelp med Mellerware Biltong King BC002 still et spørsmål nedenfor, og andre brukere vil svare deg




Foodprosessor Mellerware Manualer

Foodprosessor Manualer

Nyeste Foodprosessor Manualer