Milwaukee M18 RADIUS ONE-KEY 2146-20 Bruksanvisning

Milwaukee Ikke kategorisert M18 RADIUS ONE-KEY 2146-20

Les nedenfor 📖 manual på norsk for Milwaukee M18 RADIUS ONE-KEY 2146-20 (16 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/16

Cat. No. / No de cat.

2146-20

M18

™

ADIUS

™

LED COMPACT SITE LIGHT WITH ONE-KEY

™

ÉCLAIRAGE DE CHANTIER COMPACTE À DEL ONE-KEY M18

™

ADIUS

™

LÁMPARA LED COMPACTA PARA OBRA ONE-KEY M18

™

ADIUS

™

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

IMPORTANT SAFETY

INSTRUCTIONS

WARNING

Read all safety warn-

ings and all instruc-

tions. Failure to follow

the warnings and instructions may result in electric

shock, re and/or serious injury. Save all warnings

and instructions for future reference.

WORK AREA SAFETY

• To reduce the risk of injury, close supervision is

necessary when an appliance is used near children.

• Store idle light out of reach of children. Warm

lights can become hazardous in the hands of chil-

dren.

ELECTRICAL SAFETY

• Power cord plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodied plugs and matching outlets will

reduce risk of electric shock.

• Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Suitable for rain and wet locations. Store in-

doors. Water and dust resistant.

• To reduce the risk of electric shock, do not put

light in water or other liquid. Do not place or store

appliance where it can fall or be pulled into a tub or

sink.

• Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

• Arrange cords carefully to avoid hazardous

environments. Tripping or snagging on cords can

cause injury and product damage. Do not allow

cords to run through puddles or across wet ground.

• Do not unplug by pulling on the cord. To unplug,

grasp the plug, not the cord.

• Unplug the cord from outlet when not in use and

before servicing or cleaning.

• Always use a suitable extension cord to reduce

the risk of electric shock.

• If operating a light in a damp location is unavoid-

able, use a ground fault circuit interrupter (GFCI)

protected supply. Use of an GFCI reduces the risk

of electric shock.

PERSONAL SAFETY

• Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of the

light in unexpected situations.

• Do not use on a ladder or unstable support.

Stable footing on a solid surface enables better

control of the light in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used

with another battery pack.

• Use light only with specically designated bat-

tery packs. Use of any other battery packs may

create a risk of injury and re.

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal

to another. Shorting the battery terminals together

may cause burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

• Do not use a battery pack or tool that is dam-

aged or modied. Damaged or modied batteries

may exhibit unpredictable behavior resulting in re,

explosion or risk of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specied in the instructions.

Charging improperly or at temperatures outside

the specied range may damage the battery and

increase the risk of re.

SERVICE

• Have your light serviced by a qualied repair

person using only identical replacement parts.

This will ensure that the safety of the light is main-

tained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES

•Chemical Burn Hazard. Keep batteries away

from children.

•This tool contains a lithium button/coin cell

battery. A new or used battery can cause severe

internal burns and lead to death in as little as 2

hours if swallowed or enters the body. Always

secure the battery cover with all screws. If it does

not close securely, stop using the tool, remove the

batteries, and keep it away from children. If you think

batteries may have been swallowed or entered the

body, seek immediate medical attention.

•Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

SPECIFICATIONS

Cat. No. ..................................................... 2146-20

Ingress Protection............................................ IP54

Max Number of Lights in Sequence ....................12

Battery Type .................................................M18™

Charger Type ................................................M18™

DC Input Volts......................................................18

DC Input Amps ...................................................2.5

AC Input Volts ....................................................120

AC Input Amps.......................................................1

AC Output Volts .................................................120

AC Output Amps ................................................11

* Reduce AC Output Amps by 1A per additional

light added in sequence.

SYMBOLOGY

Volts

Direct Current

Alternating Current

UL Listing for Canada and U.S.

CAUTION

Bright Light -

Do Not Stare Into Light

FUNCTIONAL DESCRIPTION

1. Area selector

2. Power

3. Brightness selector

4. Battery bay

5. AC input

6. ONE-KEY indicator

7. Rafter hook

8. AC output

9. Handle

10. Security cable (not shown)

GROUNDING

DANGER

Improperly connecting the ground-

ing wire can result in the risk of

electric shock. Check with a qualied electrician

if you are in doubt as to whether the outlet is

properly grounded. Do not modify the plug pro-

vided with the tool. Never remove the grounding

prong from the plug. Do not use the tool if the

cord or plug is damaged. If damaged, have it

repaired by a MILWAUKEE service facility before

use. If the plug will not t the outlet, have a

proper outlet installed by a qualied electrician.

Grounded Tools (Three-Prong Plugs)

Tools marked “Grounding Required” have a three

wire cord and three prong grounding plug. The plug

must be connected to a properly grounded outlet

(See Figure A). If the tool should electrically mal-

function or break down, grounding provides a low

resistance path to carry electricity away from the

user, reducing the risk of electric shock.

The grounding prong in the plug is connected through

the green wire inside the cord to the grounding

system in the tool. The green wire in the cord must

be the only wire connected to the tool's grounding

system and must never be attached to an electrically

“live” terminal.

Your tool must be plugged into an appro-

Fig. A

priate outlet, properly installed and

grounded in accordance with all codes

and ordinances. The plug and outlet

should look like those in Figure A.

Double Insulated Tools (Two-Prong Plugs)

Tools marked “Double Insulated” do not require

grounding. They have a special double insulation

system which satises OSHA requirements and

complies with the applicable standards of Underwrit-

ers Laboratories, Inc., the Canadian

Fig. B

Fig. C

Standard Association and the National

Electrical Code. Double Insulated tools

may be used in either of the 120 volt

outlets shown in Figures B and C.

Produkspesifikasjoner

Merke:	Milwaukee
Kategori:	Ikke kategorisert
Modell:	M18 RADIUS ONE-KEY 2146-20

Trenger du hjelp?

Hvis du trenger hjelp med Milwaukee M18 RADIUS ONE-KEY 2146-20 still et spørsmål nedenfor, og andre brukere vil svare deg

Ditt navn*

Din e-post*

Skriv spørsmålet ditt her

Ikke kategorisert Milwaukee Manualer

Milwaukee M12 2550-20 Bruksanvisning

13 August 2025

Milwaukee M12 3450-20 Bruksanvisning

13 August 2025

Milwaukee 5319-DE Bruksanvisning

13 August 2025

Milwaukee M18 RADIUS ONE-KEY 2146-20 Bruksanvisning

13 August 2025

Milwaukee M18 BBPFP2 Bruksanvisning

10 August 2025

Milwaukee SRC30-1 Bruksanvisning

9 August 2025

Milwaukee M18 BBPFP2-CST Bruksanvisning

8 August 2025

Milwaukee 48-22-8546 Bruksanvisning

4 August 2025

Milwaukee 48-22-3522 Bruksanvisning

4 August 2025

Milwaukee 48-54-0100 Bruksanvisning

4 August 2025

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer

Moulinex Inicio IM1226 Bruksanvisning

13 August 2025

Metronic Zap 3 495387 Bruksanvisning

13 August 2025

Viewsonic VPC-A31-O1 Bruksanvisning

13 August 2025

Krups Aquacontrol Success FLF34W Bruksanvisning

13 August 2025

Viewsonic VB-WPS-001 Bruksanvisning

13 August 2025

Crestron DM-CONN-ULTRA-RECP-XA-20 Bruksanvisning

13 August 2025

Hamax Sno Formel Bruksanvisning

13 August 2025

Metronic 370276 Bruksanvisning

13 August 2025

Advantech LEO-S592-TP Bruksanvisning

13 August 2025

Krups Ovomat Trio F23414 Bruksanvisning

13 August 2025