NUVO Bento 60/4082 Bruksanvisning

NUVO Lettelse Bento 60/4082

Les nedenfor 📖 manual på norsk for NUVO Bento 60/4082 (2 sider) i kategorien Lettelse. Denne guiden var nyttig for 18 personer og ble vurdert med 4.6 stjerner i gjennomsnitt av 9.5 brukere

Side 1/2
ASSEMBLY INSTRUCTION
SKU#60/4 082
NOTE: Please consult a qualied electrician if you are not certain of the installation or service.
CAUTION: Before starting the installation or service, disconnect the power by turning o the circuit
breaker or by removing the fuse at the fuse box.
1. Carefully unpack the xture, lay out all parts on a clean surface.
2. Fasten the cross bar onto the outlet box by using provided 2 outlet box screws.
3. Tie ground wire from outlet box and from xture to the ground screw on the oss bar. Connect white wire cr
(live wire) from supply circuit. Cover connections using provided wire connectors.
4. Place the xture body to the wall by aligning the protruding mounting screws all the way through the wall
plate and tighten lock nuts to the mounting screws until the xture body is held rmly against the wall.
5. Unscrew the socket rings and socket covers from the sockets. Place the shades and socket covers over the
sockets, refasten the socket rings to secure them.
6. Install the bulbs ot included). (N
7. Turn on the power. This xture can be installed as an up-light or down-light position. a
A Satco Product

Produkspesifikasjoner

Merke: NUVO
Kategori: Lettelse
Modell: Bento 60/4082

Trenger du hjelp?

Hvis du trenger hjelp med NUVO Bento 60/4082 still et spørsmål nedenfor, og andre brukere vil svare deg