NUVO Helium 60/4181 Bruksanvisning

NUVO Lettelse Helium 60/4181

Les nedenfor 📖 manual på norsk for NUVO Helium 60/4181 (2 sider) i kategorien Lettelse. Denne guiden var nyttig for 14 personer og ble vurdert med 5.0 stjerner i gjennomsnitt av 7.5 brukere

Side 1/2
ASSEMBLY INSTRUCTION
SKU#60/4181, 60/ 4201
NOTE: Please consult a qualied electrician if you are not certain of the installation or service.
CAUTION: Before starting the installation or service, disconnect the power by turning o the circuit
breaker or by removing the fuse at the fuse box.
1. Carefully unpack the xture, lay out all parts on a clean surface.
2. Fasten the cross bar onto the outlet box by using provided 2 outlet box screws.
3. Tie ground wire from outlet box and from xture to the ground screw on the cross bar. Connect white wire
(live wire) from supply circuit. Cover connections using provided wire connectors.
4. Place the xture body to the wall by aligning the protruding mounting screws all the way through the wall
plate and tighten lock nuts to the mounting screws until the xture body is held rmly against the wall.
5. Unscrew the socket ring and socket cover from the socket. Place the shade and socket cover over the
socket, refasten the socket ring to secure . it
6. Install the bulb (Not included).
7. Turn on the power. This xture can be installed as an up-light or down-light position. a
A Satco Product

Produkspesifikasjoner

Merke: NUVO
Kategori: Lettelse
Modell: Helium 60/4181

Trenger du hjelp?

Hvis du trenger hjelp med NUVO Helium 60/4181 still et spørsmål nedenfor, og andre brukere vil svare deg