PAC CP1-TSL1 Bruksanvisning
PAC
Ikke kategorisert
CP1-TSL1
Les nedenfor 📖 manual på norsk for PAC CP1-TSL1 (3 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 20 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 10.5 brukere
Side 1/3
© 2023 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
C
Page 1
Rev: V1
Date: 021323
CANPRO Harness
for Select Tesla Vehicles
CP1- TSL1
Output 8 Pos. 250mA
Output 7 Pos. 250mA
Output 6 Pos. 250mA
Output 5 Pos. 250mA
Output 4 Pos. 250mA
Output 3 Speed Pulse
Output2 Pos. 250mA
Output1 Pos. 250mA
Output 9 Neg. 250mA
The CP1TSL1 is a factory matched plug & play harness for use with the CANPRO CP1-S CAN-Bus Interface Module for
Tesla Model 3 and Model Y applications using the 26pin data harness. The harness and module allow a simple and safe
way to access vehicle information, status and triggers from the CAN-Bus for a wide range of aftermarket uses such as
radar detectors, camera activation, sound system upgrades, lighting and more!
Introduction and Features
Important Notes
1. Any unused outputs should be insulated to prevent shorting.
2. The outputs of the CANPRO are low current (250mA) and require the use of a separate relay if additional current is required.
3. The vehicle should be in a resting state prior to opening connection to the 26pin data harness. See Installation note for further
information.
Wiring Connection Chart
Outputs
To Factory
Harness
To Factory
Harness
Description
Description
Description
DescriptionDescription Polarity
Polarity
Polarity
PolarityPolarity Wire Color
Wire Color
Wire Color
Wire ColorWire Color
Output 1 Accessory + Positive (250mA) White-Red
Output 2 Illumination + Positive (250mA) Blue
Output 3 Speed Pulse Pulse Green-Black
Output 4
Reverse + Positive (250mA) Violet-Black
Output 5 Ignition* + Positive (250mA) Yellow-Black
Output 6 Left Turn Signal + Positive (250mA) Red-Black
Output 7
Right Turn Signal + Positive (250mA) Gray-Red
Output 8
High Beam + Positive (250mA) Blue-Black
Output 9
Parking Brake - Negative (250mA) Brown-Black
Output Wires
1-9
DIP Switches
16pin
Interface
Connector
Status
LED
CANPRO CP1-S
* In Electric Vehicles, Output 5 provides a positive output when the vehicle is in a “Ready to Drive” state.
Produkspesifikasjoner
| Merke: | PAC |
| Kategori: | Ikke kategorisert |
| Modell: | CP1-TSL1 |
Trenger du hjelp?
Hvis du trenger hjelp med PAC CP1-TSL1 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert PAC Manualer
3 August 2025
3 August 2025
3 August 2025
3 August 2025
3 August 2025
10 Mars 2025
19 Februar 2025
19 Februar 2025
19 Februar 2025
19 Februar 2025
Ikke kategorisert Manualer
- Brita
- Garden Feelings
- Edesa
- Jocca
- Nacon
- Icon
- Peavey
- Trijicon
- Thorens
- Posiflex
- Rock N Roller
- Triton
- Enphase
- Singercon
- V7
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025