Panduit LCA4-38-L Bruksanvisning
Panduit
Kompressor
LCA4-38-L
Les nedenfor 📖 manual på norsk for Panduit LCA4-38-L (3 sider) i kategorien Kompressor. Denne guiden var nyttig for 27 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 14 brukere
Side 1/3
COPPER COMPRESSION CONNECTORS
For Technical Support: panduit.comtechsupport@
Page 1 of 4
INSTALLATION INSTRUCTIONS T-PMPI-63-PC
C
Panduit Corp. 2024
Rev 1 1
1. Use a connector marked for the wire size and wire material to be used. NEVER
use a copper connector on aluminum wire.
2.
Strip wire insulation to approximate length shown on tool chart. DO NOT nick
or
ring the conductor strands.
3.
Clean the wire.
4.
Insert stripped wire into connector until the wire stops.
5.
Using installation tooling shown on other side, insert connector in die and crimp
between color bands or knurl markings, use these markings as a guide to evenly
space crimps on barrel of connector. Begin crimping near the tongue end of
the lug and continue crimping toward the wire end.
IMAGES BELOW DEPICT CRIMP ZONES, AND SERVE AS GENERAL GUIDELINES FORA
THE CRIMP AREA. REQUIRED NUMBER OF COMPRESSIONS SHOWN ON TOOL
CHART IN ( ) ON PAGES 2,3 & 4 BASED ON TOOL AND DIE COMBINATION USED.
6.
After crimping, inspect for sharp edges, flash or burrs and remove if present.
COPPER COMPRESSION CONNECTOR INSTALLATION
1
1 2
1 2 3
1 2 3 4
# ZONESOF CRIMP : 1
# ZONESOF CRIMP : 2
# ZONESOF CRIMP : 3
# ZONESOF CRIMP : 4
Produkspesifikasjoner
| Merke: | Panduit |
| Kategori: | Kompressor |
| Modell: | LCA4-38-L |
Trenger du hjelp?
Hvis du trenger hjelp med Panduit LCA4-38-L still et spørsmål nedenfor, og andre brukere vil svare deg
Kompressor Panduit Manualer
1 April 2025
1 April 2025
Kompressor Manualer
- Fuxtec
- Prebena
- Laica
- Osram
- NEO Tools
- Global
- TAURUS Titanium
- Airpress
- Eventide
- Xiaomi
- Parkside
- Craftsman
- Duro Pro
- SPL
- Fini
Nyeste Kompressor Manualer
10 Oktober 2025
9 Oktober 2025
8 Oktober 2025
8 Oktober 2025
5 Oktober 2025
5 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025