Pulsar AWO510PU Bruksanvisning

Les nedenfor 📖 manual på norsk for Pulsar AWO510PU (14 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 23 personer og ble vurdert med 4.6 stjerner i gjennomsnitt av 12 brukere

Side 1/14
INSTRUKCJA MONTAŻU/ASSEMBLY INSTRUCTIONS
POLSKI/ENGLISH
Kod / Code: AWO510PU
Nazwa/ Name: 17/40/M-F/PUSTA
Obudowa metalowa do: SSWiN, KD,….
Metal casing for: alarms, access control....
IM510PU
Wydanie: 5 z dnia 29.07.2021
Zastępuje wydanie: 4 z dnia 22.07.2021
PL/EN
1. Przeznaczenie Destination:/
Obudowy zaprojektowane AWO510PU zostały, jako elementy systemów SSWiN, KD, itp.
Przeznaczone są do montażu (w zależności od modelu):
płyty centrali alarmowej i opcjonalnie dodatkowych modułów
kontrolera systemu KD i modułów dodatkowych
nadajnika radiowego lub GSM, opcjonalnie modułu zasilacza buforowego
innych dedykowanych urządzeń
do obudowy można zamontować transformator typu: TRZ40, TRZ50, TRZ80
możliwość zmiany kierunku otwierania drzwi lewa/prawa
drzwiczki posiadają przetłoczenie do wybicia pozwalające na montaż zamka MR008 (różny kod)
lub MR027 (ten sam kod).
Uwaga! - Zamek nie znajduje się na wyposażeniu obudowy należy go zakupić.
The metal casings are designed as components (supplying) in intruders alarms, access control systems, AWO510PU
security systems etc. There are intended for installation:
control panel optional with supplementary modules
access control controllers with optional modules
radio or GSM transmitter with optional module PSU
other dedicated devices, components etc.
transformers which can be mounted in the casing: TRZ40, TRZ50, TRZ80.
left / right door opening
door has embossing to be knocked out allowing installation of lock MR008 (different code)
or MR027 (the same code)
Caution! Lock is not included.
2. M / Installation:ontaż
Obudowa przeznaczona jest do montażu przez wykwalifikowanego posiadająceginstalatora, o odpowiednie
(wymagane i konieczne dla danego kraju) zezwolenia i uprawnienia do ingerencji w instalacje niskonapięciowe.
Obudowa (+PCB) powinna być montowana w pomieszczeniach zamkniętych, o normalnej wilgotności powietrza
(RH=90% maks. bez kondensacji) i temperaturze z zakresu - 10°C do +40°C.
The metal casing must be installed by a qualified installer, holding the relevant certificates, required and necessary in
the particular country for connecting (interfering with) the 230 V AC systems and low-voltage installations.
The casing (+PCB) should be installed indoors, where the air humidity is normal (RH=90% max. without condensation)
and temperature in the range of - 10°C to +40°C.
3. Parametry techniczne / Technical data:
PARAMETRY
TECHNICZNE
TECHNICAL
DATA
Miejsce dla akumulatora
Space for battery
17Ah/12 V
Zabezpieczenie antysabotażowe
Tamper protection
1x otwarcie obudowy
1x opening casing
Obciążalność wyjścia TAMPER- max
Output current TAMPER - max
500mA@50 V DC
Obudowa: IP
Casing: IP
IP 20
Temperatura pracy
Operating temperature
- 10ºC÷40ºC
Wilgotność wzglę dna RH max.
Relative humidity RH max.
90 [%]
Wymiary zewnętrzne obudowy
Wymiary zewnętrzne kołnierza
Głębokość robocza
External dimensions of the enclosure
External dimensions of the flange
Working depth
W=350, H=4 , D+D52
1
=100+8
[-/+2] [mm]
W
1
=385, H
1
=430 [+/- 2mm]

Produkspesifikasjoner

Merke: Pulsar
Kategori: Ikke kategorisert
Modell: AWO510PU

Trenger du hjelp?

Hvis du trenger hjelp med Pulsar AWO510PU still et spørsmål nedenfor, og andre brukere vil svare deg