R-Go Tools Zepher 4 C2 Bruksanvisning

Les nedenfor 📖 manual på norsk for R-Go Tools Zepher 4 C2 (18 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 15 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/18
circular
monitor arm
R-Go Caparo 4 D2 &
R-Go Zepher 4 C2
Nachhaltiger Monitor Arm
Circulaire Bras d’écran
2
Contents
Tips for healthy screen use 3
What’s in the box? 4
Setup Single Monitor Arm 8
Smart StopTM 10
Setup Dual Monitor Arm 18
Watch How To Set Up
Your Monitor Arm
http://r-go.tools/monitor_arm
3
Did you know that a wrong set-up of your monitor has a
negative effect on your working posture? You can easily
get physical complaints, such as neckpain. Here some tips
to create a healthy set-up:
Place the top of your screen at eye level. You will
automatically sit up straight.
Place your screen at least at arms length to give some
relieve to your eyes.
Place your screen directly in front of you. This way, you
will adopt an straight posture while working.
To make maximum use of the depth of your desk, we
recommend that you do not fix the base of the monitor
arm in the middle, but position it approximately 45 cm out
of the middle of the desktop.
Do you work with two monitors? We recommend to place
the most frequently used screen right in front of you. The
other (additional) screen should be placed directly next
to it, at the same height, and pulled slightly towards you.
This set-up ensures that you will sit straight most of your
working day.
Tips for healthy screen use
4
What’s in the box?
R-Go Caparo 4 D2 Single Monitor Arm
01
03
02
04
05
06
5
R-Go Zepher 4 C2 Single Monitor Arm
What’s in the box?
03
02
05
06
01
04
6
What’s in the box?
R-Go Caparo 4 D2 Dual Monitor Arm
01
03
02
04
05
06
2x
2x
2x
2x
7
R-Go Zepher 4 C2 Dual Monitor Arm
What’s in the box?
03
02
05
06
01
04
2x
2x
2x
2x
8
Setup
Single monitor arm
Step 1 Slide the base 1 onto the desktop. Tighten the
screw A with the hex key B.
B
A
9
Step 2a Insert the pole 2 into
the base 1 until you hear it make
contact with the table.
Step 2b Keep the pole 2 pressed
down while tightening the ring .
1
2
10
Smart Stop
TM
Create your own setup
*Smart Stop
TM: At the bottom of the ring there is a small
arrow. This arrow indicates where the Smart StopTM is, i.e.
where the arm stops rotating. It is important to have the
arrow on the correct side (left or right), so that the arm
stops rotating and for example does not bump into an
acoustic screen (see p. 10 & 11 for setup).
1
2

Produkspesifikasjoner

Merke: R-Go Tools
Kategori: Ikke kategorisert
Modell: Zepher 4 C2

Trenger du hjelp?

Hvis du trenger hjelp med R-Go Tools Zepher 4 C2 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert R-Go Tools Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer