Rigol RM-DG Bruksanvisning

Les nedenfor 📖 manual på norsk for Rigol RM-DG (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 5 personer og ble vurdert med 4.1 stjerner i gjennomsnitt av 3 brukere

Side 1/2
Installation Guide RIGOL
1
RM-DM-3 Rack Mount Kit
This rack mount kit is designed to mount RIGOL DM3068/DM3058/DM3058E series digital
multimeter into a 19-inch cabinet that conforms to the Electronic Industries Association (EIA)
standard.
Kit Part Checklist
No. Name Qty. Description
1 Front Plate 1 --
2 Bottom Plate 1 --
3 Left Plate 1 --
4 Right Plate 1 --
5 Retaining Bracket 2 --
6 M4 Screw 16 M4x8 Phillips Pan Head Screw
7 M6 Screw 4 M6x16 Phillips Pan Head Screw
8 M6 Nut 4 M6 Square Lock Cage Nut
Installation Tool
The PH2 Philips screwdriver is recommended.
RIGOL
6 7 8
1 2 6
3 4 5
7 8
Installation Guide RIGOL
2
Space Requirements
To mount the instrument into the cabinet correctly, please ensure that the following
requirements are met.
The cabinet must be a standard 19-inch one.
The available height of the cabinet should be at least 3U (133.5mm).
The depth of the cabinet should be at least 400mm.
The dimensions of the rack are as shown below.
Unit: mm
Installation Procedures
CAUTION
Only authorized operators are allowed to perform the installation. Improper
installation might cause damage to the instrument or an installation failure.

Produkspesifikasjoner

Merke: Rigol
Kategori: Ikke kategorisert
Modell: RM-DG

Trenger du hjelp?

Hvis du trenger hjelp med Rigol RM-DG still et spørsmål nedenfor, og andre brukere vil svare deg