Rigol RM-DSG3000 Bruksanvisning

Les nedenfor 📖 manual på norsk for Rigol RM-DSG3000 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 7 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 4 brukere

Side 1/2
Installation Guide RIGOL
1
RIGOL DSG3000 Rack Mount Kit
This rack mount kit is designed to mount RIGOL DSG3000 series RF signal generator into a
19-inch cabinet that conforms to the Electronic Industries Association (EIA) standard.
Kit Part Checklist
No. Name Qty. Description
1 Fastener 2 --
2 Rack Handle 2 --
3 M4 Screw 8 M4 x 8 Phillips Pan Head Screw
4 M6 Screw 4 M6 x 16 Phillips Pan Head Screw
5 M6 Nut 4 M6 Square Lock Cage Nut
3 4 5
2 1 4 3 5
Installation Guide RIGOL
2
Installation Tool
The PH2 Philips screwdriver is recommended.
Space Requirements
To mount the instrument into the cabinet correctly, please ensure that the following
requirements are met.
The cabinet must be a standard 19-inch one.
The available height of the cabinet should be at least 2U (88.9 mm).
The depth of the cabinet should be at least 450 mm.
The dimensions of the rack are as shown below.
Unit: mm
Installation Procedures
CAUTION
Only authorized operators are allowed to perform the installation. Improper
installation might cause damage to the instrument or an installation failure.

Produkspesifikasjoner

Merke: Rigol
Kategori: Ikke kategorisert
Modell: RM-DSG3000

Trenger du hjelp?

Hvis du trenger hjelp med Rigol RM-DSG3000 still et spørsmål nedenfor, og andre brukere vil svare deg