Ryobi R36XCHS26 Bruksanvisning

Ryobi Ikke kategorisert R36XCHS26

Les nedenfor 📖 manual på norsk for Ryobi R36XCHS26 (20 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/20
R36XBCT10
2
Original Instructions
IMPORTANT!
It is essential that you read the instructions in this manual
before assembling, operating, and maintaining the
product.
Subject to technical modication.
Safety, performance, and dependability have been given top
priority in the design of your cordless brushcutter.
INTENDED USE
The cordless brushcutter is intended for cutting shrubs,
brushes, and similar vegetation at or about ground level.
The product can also cut long grass, pulpy weed, and similar
vegetation.
The cutting plane should be approximately parallel to the
ground surface.
The product is intended to be used only by adults who have
read and understood the instructions and warnings in this
manual and can be considered responsible for their actions.
The product is intended for outdoor use only. For safety
reasons, the product must be adequately controlled by a
two-handed operation.
Do not use the product for any other purpose.
GENERAL PRODUCT SAFETY WARNINGS
WARNING! Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, re and/or serious injury.
Save all warnings and instruction for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) product or battery-operated (cordless)
product.
WORK AREA SAFETY
■ Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
■ Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
■ Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
■ Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
■ Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
■ Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
■ Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
■ When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
■ If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
PERSONAL SAFETY
■ Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
■ Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
■ Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on
invites accidents.
■ Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
■ Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
■ Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery or long hair can
be caught in moving parts.
■ If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
■ Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
POWER TOOL USE AND CARE
■ Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
■ Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
■ Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
3
Original Instructions
■ Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
■ Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
■ Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■ Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
■ Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
■ Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■ Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
■ When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
■ Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
■ Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
■ Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 130 °C may cause explosion.
■ Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk of
fire.
SERVICE
■ Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
■ Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
BRUSHCUTTER SAFETY WARNINGS
■ Do not use the machine in bad weather conditions,
especially when there is a risk of lightning. This
decreases the risk of being struck by lightning.
■ Thoroughly inspect the area for wildlife where the
machine is to be used. Wildlife may be injured by the
machine during operation.
■ Thoroughly inspect the area where the machine is to
be used and remove all stones, sticks, wires, bones,
and other foreign objects. Thrown objects can cause
personal injury.
■ Before using the machine, always visually inspect to
see that the cutter or blade and the cutter or blade
assembly are not damaged. Damaged parts increase
the risk of injury.
■ Follow instructions for changing accessories.
Improperly tightened blade securing nuts or bolts
may either damage the blade or result in it becoming
detached.
■ The rated rotational speed of the blade must be at
least equal to the maximum rotational speed marked
on the machine. Blades running faster than their rated
rotational speed can break and fly apart.
■ Wear eye, ear, head and hand protection. Adequate
protective equipment will reduce personal injury by flying
debris or accidental contact with the cutting line or blade.
■ While operating the machine, always wear safety
footwear. Do not operate the machine when barefoot
or wearing open sandals. This reduces the chance of
injury to the feet from contact with a moving cutter, line
or blade.
■ While operating the machine, always wear long
trousers. Exposed skin increases the likelihood of injury
from thrown objects.
■ Keep bystanders away while operating the machine.
Thrown debris can result in serious personal injury.
■ Always use two hands when operating the machine.
Holding the machine with both hands will avoid loss of
control.
■ Hold the machine by the insulated gripping surfaces
only, because the cutting line or blade may contact
hidden wiring. Cutting line or blades contacting a “live”
wire may make exposed metal parts of the machine
“live” and could give the operator an electric shock.
■ Always keep proper footing and operate the
machine only when standing on the ground. Slippery
or unstable surfaces may cause a loss of balance or
control of the machine.
■ Do not operate the machine on excessively steep
slopes. This reduces the risk of loss of control, slipping
and falling which may result in personal injury.
■ When working on slopes, always be sure of your
footing, always work across the face of slopes,
never up or down and exercise extreme caution
when changing direction. This reduces the risk of
loss of control, slipping and falling which may result in
personal injury.

Produkspesifikasjoner

Merke: Ryobi
Kategori: Ikke kategorisert
Modell: R36XCHS26

Trenger du hjelp?

Hvis du trenger hjelp med Ryobi R36XCHS26 still et spørsmål nedenfor, og andre brukere vil svare deg


Ikke kategorisert Ryobi Manualer

Ryobi

Ryobi One+ P1818 Bruksanvisning

1 September 2025
Ryobi

Ryobi RRT4 Bruksanvisning

31 August 2025
Ryobi

Ryobi RWB03 Bruksanvisning

31 August 2025
Ryobi

Ryobi R18CK2BL Bruksanvisning

31 August 2025
Ryobi

Ryobi One+ PBLCK02K Bruksanvisning

31 August 2025
Ryobi

Ryobi One+ RCK183B Bruksanvisning

31 August 2025
Ryobi

Ryobi 18V One+ R18SPL Bruksanvisning

31 August 2025
Ryobi

Ryobi One+ RY18PS15A Bruksanvisning

31 August 2025
Ryobi

Ryobi One+ P4003K Bruksanvisning

31 August 2025
Ryobi

Ryobi Max Power OP40HBA Bruksanvisning

31 August 2025

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer

Vimar

Vimar ELVOX 40690 Bruksanvisning

1 September 2025
SereneLife

SereneLife SLGLF140 Bruksanvisning

1 September 2025
SereneLife

SereneLife SLCPTBOV120 Bruksanvisning

1 September 2025
DataVideo

DataVideo LBK-2 Bruksanvisning

1 September 2025
Chapin

Chapin 84600 Bruksanvisning

1 September 2025
Fluke

Fluke SB140 Bruksanvisning

1 September 2025
Chapin

Chapin 4701 Bruksanvisning

1 September 2025
Chapin

Chapin 21250XP Bruksanvisning

1 September 2025
SereneLife

SereneLife PSLMSTN33 Bruksanvisning

1 September 2025
SereneLife

SereneLife SLEZBDTW10 Bruksanvisning

1 September 2025