SereneLife SLX1SC Bruksanvisning

Les nedenfor 📖 manual på norsk for SereneLife SLX1SC (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
Features:
Ensures the Door Open and Closes Smoothly
Prevent Noise from Slamming Shut
Made from High-Quality Carbon Steel & ABS
Strong and Durable
Easy to Install and Mount
Suitable for a Wide Range of Door Types
Smooth and Secure Open and Close with No Slamming
What's in the Box:
(1) Set of Hydraulic Door Stopper
Technical Specs:
Construction Material: Carbon Steel Suction Head, ABS Housing
Total Item Length: 6.47" -in.
Weight Capacity: 180 lbs.
Product Dimension (L x W x H): 6.47" x 2.04 x 1.37" -in.
Product Dimension
www.SereneLifeHome.com
Questions? Comments?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Detachment positioning force 60-80N
Trigger force
15-20N
Buering Stroke
≥ 5 x 6”
Applicable environment
-5°C to 40°C (23°F to 104°F)
Total Stroke
≥ 15 x 16”
Lifespan
100,000 cycles
Applicable Range Interior doors
Door Suction Base Door Suction Head
6.47"
/ ”1
9
16 / ”1
3
16
Lock Tongue
1
21
32/ ”
1
31
32/ ”
1
1
32/ ”
Installation Steps
www.SereneLifeHome.com
1 2
3 4
5 6
7
8
Double-sided tape
First, determine the installation position.
Clean installation position with a wet cloth then make
it dry. Peel o the double-sided tape on the bottom
surface of the door suction base.
Door suction head
Place the door suction on the oor as shown.
Note: The door suction head should be tightly attached
to the bottom surface.
3M tape template
Stick the 3M tape template on
the oor along the edge of the
door suction base.
Note: After the product is
pasted, press it rmly with your
hand for 30 seconds. Allow the
double-sided tape to remain
static for more than 12 hours to
achieve the best strength.
The xed position of the tape
should be kept dry.
Swing the door towards
the closing direction and
take o the door suction
head horizontally along
the oor.
Peel o the tape, align the door suction head base with
the position of 3M template and attach the door suction
head to the oor. Peel o the 3M template tape after
nish.
Abnormal Handling
If the lock tongue is receded as
shown, use the tool to pull it out.
Check to ensure the roller and
lock tongue is well aligned.
Usually the roller (position 1) of
should be 1mm lower than the
lock tongue (position 2).
1
2
±4
Door suction head
If readjustment is needed, loosen the xing screw,
the oor suction head can be adjusted by 4mm

Produkspesifikasjoner

Merke: SereneLife
Kategori: Ikke kategorisert
Modell: SLX1SC

Trenger du hjelp?

Hvis du trenger hjelp med SereneLife SLX1SC still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert SereneLife Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer