SilverStone XE360-SP5 Bruksanvisning

SilverStone datakjølekomponent XE360-SP5

Les nedenfor 📖 manual på norsk for SilverStone XE360-SP5 (2 sider) i kategorien datakjølekomponent. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/2

High performance All-In-One liquid cooler

XE360-4677

www.silverstonetek.com

User manual

Contents

Fan Screw x12

4pin Peripheral

adapter cable x1

Case Screw x12

3 in 1 Fan cable x1

PSU

AIO_PUMP

CPU_FAN

C D

1.Please wear ESD gloves to protect the processor and CPU socket before installation process

2.Install the processor first with the plastic carrier. Align the golden color triangle mark with the hollow triangle mark on the carrier, then align the

key on the processor IHS cover and side, push the processor and confirm the 4 clips securely locked (Figure 1 &2)

Note: the carrier latches must be fully engaged with the keying slots on the edges of the processor and the processor must be securely seated

on the carrier after insertion.

3.Remove the heatsink from its packaging and remove the protection cover of Thermal Interface Material (TIM). The required amount of TIM has

been pre-applied on the bottom of the heatsink. Inspect the pre-applied TIM for any damage before use.

4.Identify processor Pin 1 and onboard socket Pin 1 to decide the heatsink installation direction; for certain motherboards, the Pin 1 location will

be different with CPU1 and CPU2. (Figure 3 & 4)

Note: The complete assembly of processor, carrier, and heat sink is called Processor Heat Sink Loading Module (PHLM) or Processor Heat Sink

Module (PHM).

5.Before assembling PHM on bolster plate, follow the sticker instructions to ensure all wires are in unlocked position. Install PHM on bolster

plate, and move all wires to locked position, then use Torx T30 screwdriver to tighten each nut of 8 LBF-IN (0.904 N-M) (Figure 5 & 6)

Hollow Triangle