StarTech.com HB30A7AME Bruksanvisning
StarTech.com
Ikke kategorisert
HB30A7AME
Les nedenfor 📖 manual på norsk for StarTech.com HB30A7AME (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 14 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 7.5 brukere
Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 3, 2019 1:35 PM
Product Diagram (HB30A7AME)
Component Function
1 2-Wire Terminal Block
• Used to connect an external DC Power Source
(7~48V DC Input) to the Hub.
2 Screw Locks (x 8)
• Used to securely lock a USB Device to the
USB-A Port on the Hub.
• Screw Lock Dimensions: Center to center 19
mm, thread size 4 - 40.
3 Power LED
• Green: Indicates that the Hub is receiving
power.
4 USB-B Host Port
• Used to connect a Host Computer to the Hub.
• Screw Lock Dimensions: Center to center 24
mm, thread size 4 - 40.
5 USB-A Ports (x 7)
• Used to connect USB Devices ( x 7) to the Hub.
• Used to charge connected USB-A Devices.
• USB-A Ports support surge and 15KV ESD
(Electrostatic Discharge) Protection.
7-Port Industrial USB 3.0 (5 Gbps) Hub | USB 3.1 Gen 1 to 7x USB-A | ESD & Surge Protection
3
Requirements
For the latest requirements, please visit www.startech.com/HB30A7AME.
• Phillips Head Screwdriver
• Writing Utensil
• Level
• Mounting Screws (x 2)
Installation
Notes: It is recommended to use an external DC Power Source (+7 - 48V DC)
connected to the 2-Wire Terminal Block to ensure sucient power/current is
delivered to each USB-A Port on the Hub.
Powering the Hub Using the Universal Power Adapter
1. Connect the Universal Power Adapter to the Terminal Block and to a AC
Electrical Outlet.
2. Connect a USB-B to USB Cable (the end will depend on USB Port you are
connecting to) to the USB-B Host Port and to a USB port on the Host Computer.
3. The Host Computer’s Operating System should detect the Hub and automatically
install it.
4. Connect your USB Devices to the USB-A Ports (x 7) on the Hub.
Powering the Hub Using the 2-Wire Terminal Block
1. Remove the Terminal Block Connector Housing from the Terminal Block on the
Hub.
2. Using a small screwdriver (Phillips or Flat Head), loosen the screws on the Terminal
Block Connectors.
3. Connect the Power and Ground Wires from your DC Power Source (+7 - 48V DC)
to the proper Terminal Block Connectors, the terminals are marked on the Hub’s
Casing.
4
5
21
Produkspesifikasjoner
| Merke: | StarTech.com |
| Kategori: | Ikke kategorisert |
| Modell: | HB30A7AME |
Trenger du hjelp?
Hvis du trenger hjelp med StarTech.com HB30A7AME still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert StarTech.com Manualer
14 Oktober 2025
13 September 2025
18 Mars 2025
18 Mars 2025
22 Januar 2025
22 Januar 2025
22 Januar 2025
22 Januar 2025
22 Januar 2025
22 Januar 2025
Ikke kategorisert Manualer
- Inverx
- Thermaltake
- Yale
- Intel
- Astro
- AudioQuest
- Intesis
- Alto
- Oehlbach
- EA Elektro Automatik
- HMS Premium
- Delonghi
- Soundsphere
- Richgro
- Vivotek
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025