StarTech.com M2E1BRU31C Bruksanvisning
StarTech.com
Ekstern harddisk
M2E1BRU31C
Les nedenfor 📖 manual på norsk for StarTech.com M2E1BRU31C (2 sider) i kategorien Ekstern harddisk. Denne guiden var nyttig for 40 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 20.5 brukere
Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: December 18, 2019 6:37 PM
Product Diagram (M2E1BRU31C)
Exterior
Component Function
1 Power LED
• Solid: Indicates that the Enclosure is receiving
power.
• Flashing: Indicates that the Drive activity.
2 USB-C Port
• Used to connect the Enclosure to the Host
Computer.
Interior
Component Function
3 Drive-Bay Screws x 4
• Used to secure the Drive Bay Cover in the
Enclosure.
4 Drive Connector • Used to connect the Drive to the Enclosure.
USB 3.2 Gen 2 Type C IP67 Rugged NVMe Enclosure
5
Adjustable Drive
Length Holes
• Used to accommodate dierent drive lengths.
6
Drive-Mount Screw/
Nut
• Used to secure the Drive to the Enclosure.
Requirements
For the latest requirements and full manual, please visit www.startech.com/
M2E1BRU31C
Installation
Warning! Drives should be handled carefully, especially when they’re transported. If
you’re not careful with your drives, you may lose data as a result.
Installing an 80 mm Drive
1. Using the Torx Screwdriver (included), remove the Drive-Cover Screws (x 4) from
the bottom of the Enclosure and remove the Cover Plate.
2. Place the Drive next to the Drive Tray and align the screw groove on the Drive with
the Adjustable Drive Length Holes on the Drive Tray.
3. Use the Torx Screwdriver and to remove the Drive-Mount Screw from the
Enclosure.
4. Gently slide the connector on the Drive (on a 30-degree angle) into the Drive
Connector on the Enclosure.
Note: The connector on your drive is keyed so that it only ts one way.
5. Lightly push the Drive down into position on the circuit board.
6. Insert the Drive-Mount Screw through the screw groove on the Drive and into the
Drive-Mount Screw Hole on the Enclosure.
7. Using the Torx Screwdriver tighten the Drive-Mount Screw, being careful not to
over-tighten.
8. Place the Cover Plate back onto the bottom on the Enclosure. Make sure that the
Cover Plate is properly aligned with the top of the Enculosure creating a tight seal
and that nothing is obstructing the Cover Plate, in order to provide a water and
dust resistance seal.
9. Insert the Drive-Cover Screws back into the four corner on the bottom of the
Enclosure.
6
4
5
3
1
2
Produkspesifikasjoner
| Merke: | StarTech.com |
| Kategori: | Ekstern harddisk |
| Modell: | M2E1BRU31C |
Trenger du hjelp?
Hvis du trenger hjelp med StarTech.com M2E1BRU31C still et spørsmål nedenfor, og andre brukere vil svare deg
Ekstern harddisk StarTech.com Manualer
22 Januar 2025
22 Januar 2025
Ekstern harddisk Manualer
- Goodram
- SecureData
- Vantec
- Lexar
- Akasa
- Toshiba
- Oyen Digital
- OWC
- Medion
- ADATA
- LaCie
- Manhattan
- Silicon Power
- Apricorn
- Sabrent
Nyeste Ekstern harddisk Manualer
30 Mars 2025
10 Mars 2025
10 Mars 2025
9 Mars 2025
6 Mars 2025
23 Februar 2025
21 Februar 2025
21 Februar 2025
21 Februar 2025
21 Februar 2025