StarTech.com PEXUSB312C3 Bruksanvisning
StarTech.com
Ikke kategorisert
PEXUSB312C3
Les nedenfor 📖 manual på norsk for StarTech.com PEXUSB312C3 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 26 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 13.5 brukere
Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: May 25, 2022
Product Diagram (PEXUSB312C3)
Port Function
1USB 3.1 Type-C Ports • Connect two USB 3.1 Gen 2 Enabled Devices
2Screws
• Secure the Low-Prole Full-Height Bracket or to
the PCIe Card (PCIe)
3PCIe x 4 Connector
• Connect the to the PCIe Card Computer
Motherboard
4SATA Power Connector
• (Optional) Connect a 15 Pin SATA Power
Connector USB 3.1 to provide extra power to the
Type-C Ports
Requirements
For the latest requirements please visit: .www.startech.com/PEXUSB312C3
• PCIe Slot
• Phillips Head Screwdriver
• (Optional) SATA Power Source
2-Port USB 3.1 Card - 10Gbps per port - 2x USB-C - PCIe
Installation
Hardware
WARNING! PCIe Cards can be severely damaged by static electricity. Make sure
that you are properly grounded before you open the or touch the Computer Case
PCIe Card Anti-Static Strap . You should wear an when you install any computer
component. If an isn’t available, discharge any built-up static Anti-Static Strap
electricity by touching a large for several seconds. Only Grounded Metal Surface
handle the by its edges and don’t touch the gold connectors.PCIe Card
1. Ensure the is .Computer Power O
2. Unplug the .Computer Power Cord
3. Remove the . Computer Cover
Note: For further information on how to remove the Computer Cover, refer to the
Manual Computer that came with the .
4. Remove the .Slot Bracket Holding Screw
5. Remove the corresponding or from an Full-Height Low-Prole Slot Bracket
available . PCIe Slot
6. Recongure the for Full-Height or Low-Prole installations. PCIe Card
a. Remove the two using a . Screws Phillips Head Screwdriver
b. Remove the . Bracket
c. Place the onto the new aligning the holes in the and the PCIe Card Bracket, Card
Bracket.
d. Insert the two through the and into . Screws PCIe Card Bracket
e. Tighten using a .Phillips Head Screwdriver
7. To install the , carefully align the with the PCIe Card Card’s PCIe x 4 Connector
selected on the Push the down rmly to ensure PCIe Slot Motherboard. PCIe Card
the is properly seated into the . PCIe Card PCIe Slot
8. (To provide extra power to the for charging) Connect USB 3.1 Type-C Ports Device
a from the to the 15 Pin SATA Power Connector Power Supply SATA Power
Connector PCIe Card on the .
9. Replace the to secure the . Slot Bracket Holding Screw PCIe Card
10. Replace the and reconnect the . Computer Cover Power Cord
2
4
1
3
Produkspesifikasjoner
| Merke: | StarTech.com |
| Kategori: | Ikke kategorisert |
| Modell: | PEXUSB312C3 |
Trenger du hjelp?
Hvis du trenger hjelp med StarTech.com PEXUSB312C3 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert StarTech.com Manualer
14 Oktober 2025
13 September 2025
18 Mars 2025
18 Mars 2025
22 Januar 2025
22 Januar 2025
22 Januar 2025
22 Januar 2025
22 Januar 2025
22 Januar 2025
Ikke kategorisert Manualer
- American Audio
- Barazza
- Javalo Elf
- Zhiyun
- Rockford Fosgate
- Havis
- SBS
- Narvon
- Baofeng
- Krups
- Einhell
- Enhance
- Vogue
- Acti
- Bolin Technology
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025