StarTech.com SM21BMU31CI3 Bruksanvisning
StarTech.com
Ikke kategorisert
SM21BMU31CI3
Les nedenfor 📖 manual på norsk for StarTech.com SM21BMU31CI3 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 20 personer og ble vurdert med 4.1 stjerner i gjennomsnitt av 10.5 brukere
Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: May 15, 2019 2:18 PM
Product Diagram (SM21BMU31CI3)
Exterior
Component Function
1Drive-Tray Screws x 2
• Used to secure the in the Drive Tray
Enclosure.
2USB-C Cable
• Used to connect the to the Enclosure Host
Computer.
Interior
Component Function
1
M.2 NGFF B Key Drive
Connector
• Used to connect the to the .Drive Enclosure
2
Drive Length Holes
(x 2)
• Used to accommodate dierent drive lengths
(42 mm, 60 mm and 80 mm).
3
Drive-Mount Screw/
Nut
• Used to secure the to the .Drive Enclosure
M.2 NGFF SATA Enclosure | USB-C | USB 3.1 (10Gbps)
1
4
Stando (not
displayed)
• Used to secure the to the Drive Enclosure
using either the 42 mm or 60 mm Drive
Length Holes.
Requirements
For the latest requirements, please visit www.startech.com/SM21BMU31CI3
• An available USB-C Port
• An M.2 NGFF SATA SSD
Installation
Installing a Drive
Warning! Drives should be handled carefully, especially when they’re transported. If
you’re not careful with your drives, you may lose data as a result.
1. Use a (included) to remove the (x 2) Phillips Head Screwdriver Drive-Tray Screws
from the . Enclosure
2. Carefully pull the out of the . Drive Tray Enclosure
3. Place the beside the and align the screw groove on the with Drive Drive Tray Drive
the on the .Adjustable Drive Length Holes Drive Tray
4. Use a to remove the .Phillips Head Screwdriver Drive-Mount Screw
Note: If the drive-mount hardware is already installed in the correct position, proceed
to step 9.
5. Align the with the correct according to the length of Stando Drive Length Hole
the .Drive
6. Insert the into the large part of the .Stando Drive Length Hole
Note: Make sure that the longer part of the stando is on the same side as the M.2
NGFF B Key Drive Connector.
7. Align the notches on the with the edges of the smaller part of the Stando Drive
Length Hole.
8. Slide the into the smaller part of the .Stando Drive Length Hole
9. Gently slide the connector on the (on a 30-degree angle) into the Drive M.2 NGFF B
Key Drive Connector Enclosure on the .
Note: Do not force the Drive into the enclosure, the connector on your drive is keyed so
that it only ts one way.
2
1
2
3
Produkspesifikasjoner
| Merke: | StarTech.com |
| Kategori: | Ikke kategorisert |
| Modell: | SM21BMU31CI3 |
Trenger du hjelp?
Hvis du trenger hjelp med StarTech.com SM21BMU31CI3 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert StarTech.com Manualer
14 Oktober 2025
13 September 2025
18 Mars 2025
18 Mars 2025
22 Januar 2025
22 Januar 2025
22 Januar 2025
22 Januar 2025
22 Januar 2025
22 Januar 2025
Ikke kategorisert Manualer
- Agfa
- Elica
- Inoksan
- Califone
- Tangent
- Lexmark
- Princess
- Coca-Cola
- ATen
- Solac
- SMS
- Oklahoma Sound
- RC Allen
- Altman
- Graff
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025