Sunbeam SB8300 Bruksanvisning
Les nedenfor 📖 manual på norsk for Sunbeam SB8300 (2 sider) i kategorien Stryke. Denne guiden var nyttig for 24 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 12.5 brukere
Side 1/2
1
Opening
Support the ironing board in the vertical
position and lift the release lever. Allow the
top leg to drop to the floor while lowering the
board until horizontal.
Adjusting the height
To increase the height of the board, lift the
release lever slightly and pull the board
upward to the desired height setting. To lower
the height, lift the release lever slightly and
gently push downwards on the board until the
desired height setting is reached.
Closing
Ensure that the iron rest is stowed under the
board before closing. To close, raise the rear
of the board (nearest the iron rest) while
lifting the release lever, allowing the rear legs
to rise and the to board swing into the
vertical position.
Using the retractable iron rest
To use the iron rest, slide it out from
underneath the board so that the rest is fully
extended. When you have finished ironing,
push the iron rest firmly back into position
underneath the board before storing.
Fitting the cover
Pull tightly on the drawstring to tighten the
cover. Press the toggle and slide it towards
the board to tighten. Release to lock in
position.
Caring for the cover
The cotton cover has been treated with
Teflon
®
Fabric Protector from DuPont. Water
rolls off and stains just wipe away. Teflon
®
provides maximum water and stain
repellency, but still allows the fabric to
breathe. A heat treatment (warm ironing or
tumble drying) will optimize the performance
of Teflon
®
. Warm machine wash on a gentle
cycle. Line or tumble dry. Do not dry clean.
To keep the cover’s shape, fit to the board
while still damp and iron dry.
Operating Instructions for your
ironing board
Produkspesifikasjoner
| Merke: | Sunbeam |
| Kategori: | Stryke |
| Modell: | SB8300 |
Trenger du hjelp?
Hvis du trenger hjelp med Sunbeam SB8300 still et spørsmål nedenfor, og andre brukere vil svare deg
Stryke Sunbeam Manualer
2 Januar 2025
14 Desember 2024
16 Oktober 2024
Stryke Manualer
- Panasonic
- G3 Ferrari
- Rowenta
- Yamazen
- Lenoxx
- T-fal
- Orbegozo
- Sencor
- Girmi
- Essentiel B
- Cecotec
- Hyundai
- Adler
- Arcelik
- Imarflex
Nyeste Stryke Manualer
31 Mars 2025
31 Mars 2025
12 Mars 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
27 Februar 2025
27 Februar 2025
27 Februar 2025