Sussex RWBMS150RH Bruksanvisning

Sussex Kran RWBMS150RH

Les nedenfor 📖 manual på norsk for Sussex RWBMS150RH (2 sider) i kategorien Kran. Denne guiden var nyttig for 23 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 12 brukere

Side 1/2
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c
Copyright © Sussex Taps.
5.5
litres per
minute
Licence No. 0124
In accordance with AS/NZS 6400
Sussex Taps Pty Ltd
The more
stars the more
water efcient
1
NOGGIN
Finished
Wall Surface
56mm
Dress
Ring
Manifold
Apply Silicone
SET
SCREW
HANDLE
BODY
Stud Face
64
2
NOGGIN
Dress Ring
Masterfit
Stud Face
Finished
Wall Surface
Bath Outlet
Product code
Circa
RWBMS150RH Wall basin mixer system 150mm
RWBMS200RH Wall basin mixer system 200mm
RWBMS250RH Wall basin mixer system 250mm
RWBMS150RH-V Wall basin mixer system 150mm - Vertex
RWBMS200RH-V Wall basin mixer system 200mm - Vertex
RWBMS250RH-V Wall basin mixer system 250mm - Vertex
Wall basin mixer system Dress kit
Mixer dress kit
Outlet fit off
- Remove Mixer protective cover.
- Using silicone, seal the wall surface around the Mixer and
Outlet threads.
- Ft the Mixer Dress Ring.
- Fit the Handle Body onto the Mixer Cartridge Lever and ensure full engagement.
- Secure the Handle Body by tightening the Set screw using the Allen Key provided (tighten well).
- Apply sealing tape (Teflon) to male thread.
- Place Dress Ring over outlet.
- Push Dress Ring back to meet the wall.
- Fit and align the Outlet.
- To complete installation , operate the Mixer(s) checking the flow of both hot and cold water from the Outlet .
Check all fittings and fixtures for water leaks.
sussextaps.com.au

Produkspesifikasjoner

Merke: Sussex
Kategori: Kran
Modell: RWBMS150RH

Trenger du hjelp?

Hvis du trenger hjelp med Sussex RWBMS150RH still et spørsmål nedenfor, og andre brukere vil svare deg