Syrp Magic Carpet PRO Bruksanvisning
Les nedenfor 📖 manual på norsk for Syrp Magic Carpet PRO (4 sider) i kategorien Kamera. Denne guiden var nyttig for 31 personer og ble vurdert med 4.4 stjerner i gjennomsnitt av 16 brukere
Side 1/4
UNLOCK
Remove Track Joiners
1
Lift open both Track Locks and pull out the
Track Joiners.
The Track Joiners are only required when
joining multiple tracks together.
Before you start filming, there are a few simple steps
to follow to ensure your Magic Carpet PRO is
assembled correctly and you’re sliding smoothly.
This guide will walk you through the correct Magic
Carpet Pro set up, as well as some helpful tips.
Setup Guide
Additional resources can be found at
support.syrp.co.nz
Install the Carriage
2
Slide the Carriage on to the Track Rails.
Ensure you lock the carriage
once installed and when not
in use.
Orientate the carriage with
the Carriage Lock on the
same side as the Flywheel
Tread!
Carriage
Lock
Flywheel
Tread
LOCK
Install the End Caps
3
Unlock both the Track Locks and insert the
End Caps.
Close the Track Locks securing the End
Caps in place.
Insert evenly with the
End Caps flush with the
Track Ends.
LOCK
UNLOCK
Remove the Quick Release Plate
5
Slide the Quick Release Lock to unlock and
push in while pulling the Plate up to remove.
PUSH IN
FIRMLY TO
UNLOCK
Adjust the Legs
4
Lift open the Leg Locks to release the legs
and set the leg angle.
Fine leg adjustment can be
achieved by twisting the
foot.
LOCK
UNLOCK
Produkspesifikasjoner
| Merke: | Syrp |
| Kategori: | Kamera |
| Modell: | Magic Carpet PRO |
Trenger du hjelp?
Hvis du trenger hjelp med Syrp Magic Carpet PRO still et spørsmål nedenfor, og andre brukere vil svare deg
Kamera Syrp Manualer
27 Mars 2025
Kamera Manualer
- UniView
- Bauhn
- Aplic
- Aida
- Maginon
- PatrolEyes
- Sony
- Leica
- Arlo
- SereneLife
- VTech
- Moultrie
- HuddleCamHD
- Getac
- Canon
Nyeste Kamera Manualer
10 April 2025
9 April 2025
3 April 2025
2 April 2025
29 Mars 2025
29 Mars 2025
28 Mars 2025
28 Mars 2025
13 Mars 2025
13 Mars 2025