T&S WaterWatch Bruksanvisning
Les nedenfor 📖 manual på norsk for T&S WaterWatch (6 sider) i kategorien Detektor. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/6
© Copyright 2020 • T&S Brass and Bronze Works, Inc.
|
All Rights Reserved
|
T&S WaterWatch™ is a Registered Trademark of T&S Brass and Bronze Works, Inc.
Thank you for purchasing T&S WaterWatch! This guide provides an overview of the installation
process for T&S WaterWatch. Our goal is to provide an easy and frictionless experience and
have WaterWatch ready for water monitoring within minutes of taking it out of the box.
Once attached and transmitting, T&S WaterWatch collects data for 7 days and learns your
water use. Check back in a week to see your results!
If you are unsure of any instruction or have questions, please contact us at 1-800-479-9642.
Read all instructions before beginning.
Unpack and familiarize yourself with the components.
Connect the sensor to WiFi.
Identify the optimal location for the sensor.
Attach the sensor to the pipe.
INSTALLATION GUIDE
1
2
3
4
5
© Copyright 2020 • T&S Brass and Bronze Works, Inc.
|
All Rights Reserved
|
T&S
WaterWatch™ is a Registered Trademark of T&S Brass and Bronze Works, Inc.
BOX COMPONENTS
T&S WaterWatch SENSOR POWER ADAPTER AND CORD
COUPLERS STRAP
© Copyright 2020 • T&S Brass and Bronze Works, Inc.
|
All Rights Reserved
|
T&S WaterWatch™ is a Registered Trademark of T&S Brass and Bronze Works, Inc.
Let’s connect the sensor to WiFi before attaching it to a
pipe. You will be using your computer or mobile phone
to access the T&S WaterWatch App.
Take the sensor and its components to your computer’s
location, or any other comfortable location if using your
mobile phone. Plug the cable into the sensor and a
power source. Notice that the Indicator Light is amber.
This means that the sensor is not connected to WiFi.
Sign into the T&S WaterWatch App at
http://WaterMonitorApp.com with your username
and password. You should have already received
an invitation to create an account from support@
conservationlabs.com. Contact support@conservationlabs.
com if you have not received access to your account.
Once in the T&S WaterWatch App, click on
“Deployment” then “Single Sensor Set-up.” You will
need your WiFi password to sync the sensor to your
router. The T&S WaterWatch App walks you through this
process, step-by-step.
You will know that the sensor is connected to WiFi when
the Indicator light is blinking green.
Indicator light
Password
reset
button
Power port
Produkspesifikasjoner
| Merke: | T&S |
| Kategori: | Detektor |
| Modell: | WaterWatch |
Trenger du hjelp?
Hvis du trenger hjelp med T&S WaterWatch still et spørsmål nedenfor, og andre brukere vil svare deg
Detektor T&S Manualer
31 August 2025
Detektor Manualer
- Detektor ORNO
- Detektor Fluke
- Detektor IFM
- Detektor Toolcraft
- Detektor Optex
- Detektor Velleman
- Detektor RIDGID
- Detektor Laserliner
- Detektor Chauvin Arnoux
- Detektor Bearware
- Detektor Tripp Lite
- Detektor Milwaukee
- Detektor K40
- Detektor Hikvision
- Detektor Noyafa
- Detektor STI
- Detektor PCE Instruments
- Detektor Sauter
- Detektor Soler And Palau
- Detektor Mercury
- Detektor Abus
- Detektor EVOLVEO
- Detektor Techno Line
- Detektor Escort
- Detektor Winland
- Detektor Satel
- Detektor Perel
- Detektor Vimar
- Detektor Ferguson
- Detektor Seaward
- Detektor Steinberg
- Detektor Astralpool
- Detektor Protector
- Detektor Sauermann
- Detektor Skyscan
- Detektor Rocky Mountain
- Detektor Bounty Hunter
- Detektor Craftfull
Nyeste Detektor Manualer
31 August 2025
30 August 2025
30 August 2025
29 August 2025
26 August 2025
24 August 2025
24 August 2025
24 August 2025
24 August 2025
24 August 2025