Toa RM-500 Bruksanvisning

Toa Mikrofon RM-500

Les nedenfor 📖 manual på norsk for Toa RM-500 (162 sider) i kategorien Mikrofon. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/162

INSTALLATION MANUAL

INTEGRATED VOICE EVACUATION SYSTEM

VX-3000 SERIES

Thank you for purchasing TOA’s Integrated Voice Evacuation System.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

1134

TOA Electronics Europe GmbH

Suederstrasse 282, 20537 Hamburg, Germany

1134-CPR-195

EN 54-16: 2008

Fire Detection and fire alarm systems - part 16: Voice alarm control and

indication system for fire detection and fire alarm systems for buildings

Options:

Manual silencing of voice alarm condition

manual reset of voice alarm condition

voice alarm condition output

indication of a fault related to voice alarm zones

voice alarm manual control

emergency microphones

redundant power amplifiers

DOP 16-004

When an EN 54-16 compliant VX-3000 system has to be installed, then carefully read the separate manual

titled "APPENDIX: ADDITIONAL INSTALLATION INSTRUCTIONS FOR AN EN 54-16 COMPLIANT

SYSTEM" and follow up the installation and configuration requirements explained therein. This APPENDIX

contains the basic description of settings and installations, so please refer to the general instruction

sections in this document for more details.

TABLE OF CONTENTS

Chapter 1 : NOTE

1. SAFETY PRECAUTIONS .......................................................................... 1-2

2. GENERAL DESCRIPTION ....................................................................... 1-6

3. SYSTEM FEATURES ................................................................................... 1-6

4. SYSTEM EXAMPLE ..................................................................................... 1-6

Chapter 2 : NOMENCLATURE AND FUNCTIONS

1. VX-3004F/3008F/VX-3016F

VOICE EVACUATION FRAME ............................................................... 2-2

2. VX-015DA/030DA/050DA

DIGITAL POWER AMPLIFIER MODULE ....................................... 2-9

3. VX-300LO LINE OUTPUT MODULE ................................................ 2-11

4. VX-3000PM PREAMP MATRIX PANEL ......................................... 2-12

5. VX-3000CT CONTROL PANEL ........................................................... 2-16

6. RM-200SF FIREMAN'S MICROPHONE ........................................ 2-18

7. RM-320F FIREMAN'S MICROPHONE EXTENSION ............. 2-21

8. RM-300X REMOTE MICROPHONE ................................................. 2-22

9. RM-210F REMOTE MICROPHONE EXTENSION ................... 2-25

10. RM-200RJ TERMINAL UNIT .............................................................. 2-26

11. RM-500 REMOTE MICROPHONE .................................................. 2-27

12. SX-200EL END OF LINE UNIT ........................................................ 2-30

13. VM-300SV END OF LINE UNIT ....................................................... 2-30

Chapter 3 : INSTALLATION AND SETTING PROCEDURES

(HARDWARE)

1. VX-015DA, VX-030DA, AND VX-050DA

DIGITAL POWER AMPLIFIER MODULE ....................................... 3-2

1.1. Changing the Speaker Line Voltage .................................................................. 3-2

1.2. Replacing the Blade Fuse ................................................................................. 3-2

2. VX-3004F, VX-3008F, AND VX-3016F

VOICE EVACUATION FRAME .............................................................. 3-3

2.1. Installing VX-015DA/030DA/050DA Digital Power Amplifier Module ................ 3-3

2.2. The Zones Allocation Setting ............................................................................ 3-5

3. VX-300LO LINE OUTPUT MODULE .................................................. 3-7

3.1. The ID Number Setting ...................................................................................... 3-9

3.2. Setting the IP Address ..................................................................................... 3-10

4. VX-3000PM PREAMP MATRIX PANEL ......................................... 3 -11

4.1. Setting the IP Address ...................................................................................... 3 -11

5. VX-3000CT CONTROL PANEL ........................................................... 3-14

5.1. Setting the IP Address ...................................................................................... 3-14

6. RM-200SF, RM-300X, AND RM-500 MICROPHONES ........ 3-19

6.1. The ID Number Settings (RM-200F and RM-300X: Switches 1 – 3 operation

or RM-500: Switches 2 – 4 operation) .............................................................. 3-19

6.2. Adjusting Microphone Sensitivity .................................................................... 3-22

6.3. Setting The RM-500's Menu ............................................................................ 3-24

6.4. CPU Off Function (All-Zone Emergency Broadcast) Settings

(RM-200SF: Switch 6 operation or RM-300X: Switch 5 operation) ................ 3-30

6.5. Termination Setting

(RM-200SF, RM-500: Switch 8 operation) ...................................................... 3-31

6.6. Using an External Microphone (RM-300X Only) ............................................ 3-32

6.7. Setting the Level of the AUX Input Terminal (RM-500 Only) ........................... 3-33

6.8. Setting for using the direct selection mode (RM-500 Only) ............................ 3-33

6.9. Using an Auxiliary Input (RM-300X Only) ....................................................... 3-34

6.10. Compressor Function Setting (RM-200SF and RM-300X only) .................... 3-36

6.11. Microphone Fault Detection Function Setting (RM-300X Only) .................... 3-38

6.12. Installing the RM-200SF on a Wall ................................................................ 3-39

6.13. Installing the RM-320F on a Wall (RM-200SF only) ...................................... 3-43

6.14. RM-300X Extension with the Addition of the RM-210F

(Installed on a Flat Surface) .......................................................................... 3-45

6.15. Installing the RM-300X on a Wall .................................................................. 3-46

6.16. Installing the RM-210F on a Wall (RM-300X Only) ....................................... 3-47

6.17. Installing the RM-500 on a Wall ..................................................................... 3-49

6.18. Creating Remote Microphone Name Labels

(RM-200SF, RM-320F, RM-300X, and RM-210F only) .................................... 3-52

7. RACK MOUNTING ...................................................................................... 3-55

7.1. Affixing Declaration of Compliance (EN 54-16 Standard) ................................ 3-56

8. CONNECTIONS ........................................................................................... 3-57

8.1. Removable Terminal Plug Connection ............................................................ 3-57

8.2. Connecting the Cable to the Push-in Terminal Block ..................................... 3-58

8.3. Input Equipment Connections ......................................................................... 3-59

8.4. Speaker Connection ........................................................................................ 3-77

8.5. Control Output Terminal Connections ............................................................. 3-80

8.6. Control Input Terminal Connections ............................................................... 3-81

8.7. Emergency Control Input Terminal Connections ............................................. 3-82

8.8. VX-3000 Unit's LAN Link Connector Connection ........................................... 3-83

8.9. Sharing Standby Amplifier .............................................................................. 3-89

Produkspesifikasjoner

Merke:	Toa
Kategori:	Mikrofon
Modell:	RM-500
Bredde:	224 mm
Dybde:	136 mm
Høyde:	47.2 mm
Strømkilde:	DC
Tilkoblingsteknologi:	Koblet med ledninger (ikke trådløs)
Innebygde høyttalere:	Ja
Sertifisering:	CE
Strømforbruk:	130 mA
Mikrofonretningstype:	Énveis
Driftsspenning:	24 V
Mikrofonfrekvens:	100 - 20000 Hz
Produktfarge:	Sort
LED-baklys:	Ja
Kontrolltype:	Knapper
Driftstemperatur (T-T):	0 - 40 °C
Bærekraftsertifikater:	CE
Enhetsgrensesnitt:	RJ-45
Kroppsmateriale:	Akrylonitril-butadien-styren (ABS)
Av/på-bryter:	Ja
Total Harmonic Distortion (THD):	1
Relativ luftfuktighet under drift (H-H):	0 - 90
Antall medfølgende produkter:	1 stykker
Mikrofonsensitivitet/mikrofonfølsomhet:	60 dB
Mikrofon Total Harmonic Distortion (THD):	1