Topeak NINJA CO2 Bruksanvisning
Topeak
Ikke kategorisert
NINJA CO2
Les nedenfor 📖 manual på norsk for Topeak NINJA CO2 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 35 personer og ble vurdert med 4.4 stjerner i gjennomsnitt av 18 brukere
Side 1/2
User's Guide
NINJA CO2
+
/ NINJA CO2
EN
HOW TO USE MICRO AIRBOOSTER
WARNING
• Accepts all 16g threaded CO cartridges.2
• Recommended to use Topeak 16g threaded CO cartridges.2
• Please read all instructions before first use.
• Periodically check that components are still securely
fastened to your bike.
• Compatible with Ninja Cage series.
• If using the Micro AirBooster inflator continuously, make sure to wait 20 seconds in between cartridges for the
rubber grommet inside the inflation head to return to its original position. Otherwise, a gas leak may occur and
prevent proper inflation.
• Tighten the CO
2 2 cartridge before using CO inflation function. Failure to do so will cause improper operation and
may cause injury.
• DO NOT remove CO
2 2 cartridge if it is still charged with gas. Completely discharge the CO cartridge before removal.
• When opening the CO
2 cartridge, point the inflator head away from yourself and others.
• DO NOT use Micro AirBooster Inflator if any part is cracked or broken.
• DO NOT expose the CO
2 cartridge to heat, or store at temperatures above 120˚F (49˚C), or store in enclosed vehicles.
• Make sure to wear gloves when inflating to avoid injury.
• The barrel and CO
2 cartridge may become extremely cold/ frosty when the CO gas is expelled. 2
• DO NOT try to unscrew the Micro AirBooster inflation head until it has warmed sufficiently to touch.
• Keep out of reach of children.
Presta Valve
Thread-in CO cartridge. Loosen valve core before inflation.2
1 2
Start and regulate CO flow by pushing 2
inflation head onto valve stem.
3
Install and thread-in inflation head
to Schrader valve.
Schrader Valve
Thread-in CO cartridge. Start and regulate CO flow by pushing 2 2
inflation head onto valve stem.
1 2 3
After each inflation, make sure
all CO
2
gas has been discharged
by pushing the Micro AirBooster
inflation head several times.
Micro AirBooster16g Topeak
Threaded CO 2
Cartridge x 2
CO Cartridge 2
Engagement
Inflation Head
To avoid possible personal
injury and damage to bike
and /or tool, ensure to
disengage CO inflator 2
properly after use by
unthreading inflation head
in correct direction.
NOTE
Tire Lever
NINJA CO2+ NINJA CO2
YES NO
Produkspesifikasjoner
| Merke: | Topeak |
| Kategori: | Ikke kategorisert |
| Modell: | NINJA CO2 |
Trenger du hjelp?
Hvis du trenger hjelp med Topeak NINJA CO2 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Topeak Manualer
2 April 2025
2 April 2025
2 April 2025
2 April 2025
31 Januar 2025
21 Desember 2024
18 Desember 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Ikke kategorisert Manualer
- Mistral
- TESLA Electronics
- Edgestar
- SKS
- Prompter People
- Beemoo
- Audio-Technica
- Bebob
- Mennekes
- Microchip
- Crimson
- ILive
- Manitowoc
- Bavaria
- Stamos
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025