Viking K-1770-3 Bruksanvisning

Viking Adgangskontrollsystem K-1770-3

Les nedenfor 📖 manual på norsk for Viking K-1770-3 (8 sider) i kategorien Adgangskontrollsystem. Denne guiden var nyttig for 20 personer og ble vurdert med 4.2 stjerner i gjennomsnitt av 10.5 brukere

Last ned PDF

Side 1/8

Vandal Resistant Entry Phones with Built-In

Keypad and 125KHz Proximity Card Reader

The K-1770-3 Series entry phones provide a tough and

attractive handsfree phone for commercial, apartment, and

residential door entry or applications requiring a vandal

resistant speaker phone with built-in 125 KHz Proximity Card

Reader. The card reader outputs industry standard 26-bit

Wiegand data, allowing it to be used with a Viking ES-1 door

controller or any controller compatible with 26-bit Wiegand

format. The K-1770-3 Series entry phones are available in

two attractive finishes: “brushed stainless steel” and “oil

rubbed bronze”.

When the “Call” button is pressed, the K-1770-3 returns dial

tone. The keypad may then be used to dial any number. If

no Touch Tone is entered within 8 seconds, CPC is detected,

a busy signal is detected, or the programmable maximum call

time has elapsed, the K-1770-3 will automatically disconnect.

Alternatively, the K-1770-3 may be disconnected by pressing

the “Call” button again. The K-1770-3 comes complete with

a standard, flush mount, rough-in box. In addition, an optional

VE-6x7 weather resistant, surface mount box is available (see

DOD 424).

The K-1770-3-EWP shares all of the features of the K-1770-3

in addition to Enhanced Weather Protection (EWP) for outdoor

installations where the unit is exposed to precipitation or

condensation. EWP products feature foam rubber gaskets

and boots, sealed connections, gel-filled butt connectors, as

well as urethane or thermal plastic potted circuit boards with

internally sealed, field-adjustable trim pots and DIP switches

for easy on-site programming. For more info, see DOD 859.

K-1770-3

“Brushed Stainless Steel”

(similar to brushed nickel)

K-1770-3-BN

“Oil Rubbed Bronze”

(satin dark brown powder paint

with fine copper metallic)

Features

• Apartment entry phone when used with the K-1900-3 Apartment Entry Dialer

or C-4000 Apartment/Office Entry Controller or C-3000 Apartment Entry

Controller

• Use with a Viking C-500 to control 1 or 2 (expandable to 8) (DOD 177)

K-1770’s and door/gate control on a single phone line

• Use with a Viking C-2000B to control 1 to 4 K-177 0’s and door/gate control

on a single phone line (DOD 156)

• Courtesy and customer assistance phone

• Automated teller (ATM) phone

• Use with a Viking ES-1 for proximity card reader door control

• Provide unique front and back door chimes and paging when use with a

Viking SLP-1 or SLP-4 and C-2000B

• Kiosk phone with (100 number speed dialing) when used with the K-1900-9

Multi-Number Dialer (DOD 321)

• Use with Viking’s Proximity Cards: PRX-C, PRX-C-ISO, PRX-FOB (DOD 198)

Entry Phone Power: Telephone line powered 20V DC/20mA minimum

Proximity Card Reader Power: 5 to 14V DC @ 60mA maximum

Dimensions: Overall: 5.5” x 6.5” x 2.6” (140mm x 165mm x 66mm),

Rough-in box: 4.5” x 5.5” x 2.5” (114mm x 140mm x 64mm)

Shipping Weight: 3.5 lbs (1.6 kg)

Environmental: -30°F to 150°F (-34°C to 65°C)

Humidity - K-1770-3: 5% to 95% non-condensing

Humidity - K-1770-3-EWP: Up to 100% condensing

Speaker Volume: Approximately 70 db maximum @1m

CPC Disconnect Time: 500ms minimum

REN #: 0.5 A

Connections: Gel-filled tip and ring connectors

Applications

Specifications

• Built-in 125KHz 26-bit Wiegand proximity card reader with LED,

beep card read confirmation, and EWP board protection

• Compatible with the following Viking Proximity Cards and Fobs:

PRX-C, PRX-C-ISO and PRX-FOB (DOD 198)

• Vandal Resistant Features: 14 gauge louvered 316 stainless

steel faceplate with permanent laser etched graphics, stainless

steel “Call” button, heavy duty metal keypad and T-10 Torx

security mounting screws, scratch resistant powder coating

(K-1770-3-BN)

• Weather Resistant Features: Marine grade 316 stainless steel

faceplate, screws and and push button switch. Switch internally

sealed per IP67. Mylar speaker. Self-draining mic mount.

Faceplate, mic and speaker gaskets. Weather Resisant powder

paint (K-1770-3-BN)

• K-1770 -3-EWP is designed to meet IP66 Ingress Protection

Rating (see DOD 859 for more information)

• Available in 2 standard faceplate finishes: 316 brushed stainless

steel or oil rubbed bronze powder paint

• Blue “in use” LED

• Telephone line powered

• Volume adjustments for microphone and speaker

• Advanced call progress detection: disconnects on busy signal,

return to dial tone, CPC, reorder tone, maximum call time out and

40 second silence time out

• Selectable auto-answer feature for monitoring

• Selectable push button disconnect

• Zinc plated steel rough-in box with (2) 3/4” conduit knockouts

• Optional VE-6x7 Surface Mount Box available (DOD 424)

• Optional VE-LIGHT to illuminate the front panel at night (DOD 428)

DESIGNED, MANUFACTURED AND SUPPORTED IN THE USA

K-1770-3 Series

Entry Phones with Keypads

and Proximity Card Readers

September 29, 2023

PRODUCT

MANUAL

SECURITY & COMMUNICATION

VIKING

Produkspesifikasjoner

Merke:	Viking
Kategori:	Adgangskontrollsystem
Modell:	K-1770-3
Innebygd skjerm:	Nei
Bredde:	165 mm
Dybde:	66 mm
Høyde:	140 mm
Støynivå:	90 dB
Plassering:	Vegg
Tilkoblingsteknologi:	Koblet med ledninger (ikke trådløs)
Pakkevekt:	1600 g
Sertifisering:	FCC Part 68\nFCC Part 15
Antall knapper:	13
Strømforbruk:	20 mA
Antall utendørsenheter:	1
Integrert tastatur:	Ja
Autentiseringstype:	Access chip/card, Password
Produktfarge:	Børstet stål
Driftstemperatur (T-T):	-34 - 65 °C
Modell/Type:	Smart adgangskontroll-leser
Kroppsmateriale:	Rustfritt stål
Internasjonal beskyttelses (IP)-kode:	IP67
Relativ luftfuktighet under drift (H-H):	0 - 95
Enkel installering:	Ja
Kamera inkludert:	Ja
Antall taster på tastatur:	12
Tilgangskode leser:	Ja
Chip/kortleser, adgang:	Ja