Viking K-1770-3-EWP Bruksanvisning

Les nedenfor 📖 manual på norsk for Viking K-1770-3-EWP (8 sider) i kategorien Adgangskontrollsystem. Denne guiden var nyttig for 17 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 9 brukere

Side 1/8
Vandal Resistant Entry Phones with Built-In
Keypad and 125KHz Proximity Card Reader
The K-1770-3 Series entry phones provide a tough and
attractive handsfree phone for commercial, apartment, and
residential door entry or applications requiring a vandal
resistant speaker phone with built-in 125 KHz Proximity Card
Reader. The card reader outputs industry standard 26-bit
Wiegand data, allowing it to be used with a Viking ES-1 door
controller or any controller compatible with 26-bit Wiegand
format. The K-1770-3 Series entry phones are available in
two attractive finishes: “brushed stainless steel” and “oil
rubbed bronze”.
When the “Call” button is pressed, the K-1770-3 returns dial
tone. The keypad may then be used to dial any number. If
no Touch Tone is entered within 8 seconds, CPC is detected,
a busy signal is detected, or the programmable maximum call
time has elapsed, the K-1770-3 will automatically disconnect.
Alternatively, the K-1770-3 may be disconnected by pressing
the “Call” button again. The K-1770-3 comes complete with
a standard, flush mount, rough-in box. In addition, an optional
VE-6x7 weather resistant, surface mount box is available (see
DOD 424).
The K-1770-3-EWP shares all of the features of the K-1770-3
in addition to Enhanced Weather Protection (EWP) for outdoor
installations where the unit is exposed to precipitation or
condensation. EWP products feature foam rubber gaskets
and boots, sealed connections, gel-filled butt connectors, as
well as urethane or thermal plastic potted circuit boards with
internally sealed, field-adjustable trim pots and DIP switches
for easy on-site programming. For more info, see DOD 859.
K-1770-3
“Brushed Stainless Steel”
(similar to brushed nickel)
K-1770-3-BN
“Oil Rubbed Bronze”
(satin dark brown powder paint
with fine copper metallic)
Features
Apartment entry phone when used with the K-1900-3 Apartment Entry Dialer
or C-4000 Apartment/Office Entry Controller or C-3000 Apartment Entry
Controller
• Use with a Viking C-500 to control 1 or 2 (expandable to 8) (DOD 177)
K-1770’s and door/gate control on a single phone line
• Use with a Viking C-2000B to control 1 to 4 K-177 0’s and door/gate control
on a single phone line (DOD 156)
• Courtesy and customer assistance phone
Automated teller (ATM) phone
• Use with a Viking ES-1 for proximity card reader door control
• Provide unique front and back door chimes and paging when use with a
Viking SLP-1 or SLP-4 and C-2000B
• Kiosk phone with (100 number speed dialing) when used with the K-1900-9
Multi-Number Dialer (DOD 321)
• Use with Viking’s Proximity Cards: PRX-C, PRX-C-ISO, PRX-FOB (DOD 198)
Entry Phone Power: Telephone line powered 20V DC/20mA minimum
Proximity Card Reader Power: 5 to 14V DC @ 60mA maximum
Dimensions: Overall: 5.5” x 6.5” x 2.6” (140mm x 165mm x 66mm),
Rough-in box: 4.5” x 5.5” x 2.5” (114mm x 140mm x 64mm)
Shipping Weight: 3.5 lbs (1.6 kg)
Environmental: -30°F to 150°F (-34°C to 65°C)
Humidity - K-1770-3: 5% to 95% non-condensing
Humidity - K-1770-3-EWP: Up to 100% condensing
Speaker Volume: Approximately 70 db maximum @1m
CPC Disconnect Time: 500ms minimum
REN #: 0.5 A
Connections: Gel-filled tip and ring connectors
Applications
Specifications
• Built-in 125KHz 26-bit Wiegand proximity card reader with LED,
beep card read confirmation, and EWP board protection
• Compatible with the following Viking Proximity Cards and Fobs:
PRX-C, PRX-C-ISO and PRX-FOB (DOD 198)
Vandal Resistant Features: 14 gauge louvered 316 stainless
steel faceplate with permanent laser etched graphics, stainless
steel “Call” button, heavy duty metal keypad and T-10 Torx
security mounting screws, scratch resistant powder coating
(K-1770-3-BN)
Weather Resistant Features: Marine grade 316 stainless steel
faceplate, screws and and push button switch. Switch internally
sealed per IP67. Mylar speaker. Self-draining mic mount.
Faceplate, mic and speaker gaskets. Weather Resisant powder
paint (K-1770-3-BN)
K-1770 -3-EWP is designed to meet IP66 Ingress Protection
Rating (see DOD 859 for more information)
Available in 2 standard faceplate finishes: 316 brushed stainless
steel or oil rubbed bronze powder paint
• Blue “in use” LED
• Telephone line powered
• Volume adjustments for microphone and speaker
Advanced call progress detection: disconnects on busy signal,
return to dial tone, CPC, reorder tone, maximum call time out and
40 second silence time out
• Selectable auto-answer feature for monitoring
• Selectable push button disconnect
• Zinc plated steel rough-in box with (2) 3/4” conduit knockouts
• Optional VE-6x7 Surface Mount Box available (DOD 424)
• Optional VE-LIGHT to illuminate the front panel at night (DOD 428)
DESIGNED, MANUFACTURED AND SUPPORTED IN THE USA
K-1770-3 Series
Entry Phones with Keypads
and Proximity Card Readers
September 29, 2023
PRODUCT
MANUAL
SECURITY & COMMUNICATION
VIKING

Produkspesifikasjoner

Merke: Viking
Kategori: Adgangskontrollsystem
Modell: K-1770-3-EWP
Innebygd skjerm: Nei
Vekt: 1600 g
Bredde: 165 mm
Dybde: 66 mm
Høyde: 140 mm
Støynivå: 70 dB
Plassering: Vegg
Tilkoblingsteknologi: Koblet med ledninger (ikke trådløs)
Pakkevekt: 1600 g
Antall høyttalere: 1
Sertifisering: FCC Part 68\nFCC Part 15
Antall knapper: 1
Strømforbruk: 20 mA
Integrert tastatur: Ja
Autentiseringstype: Access chip/card, Password
Produktfarge: Rustfritt stål
Driftstemperatur (T-T): -29 - 54 °C
Modell/Type: Smart adgangskontroll-leser
Kroppsmateriale: Rustfritt stål
Internasjonal beskyttelses (IP)-kode: IP67
Relativ luftfuktighet under drift (H-H): 0 - 100
Enkel installering: Ja
Antall taster på tastatur: 12
Tilgangskode leser: Ja
Chip/kortleser, adgang: Ja

Trenger du hjelp?

Hvis du trenger hjelp med Viking K-1770-3-EWP still et spørsmål nedenfor, og andre brukere vil svare deg