Westinghouse Academy 6131900 Bruksanvisning

Westinghouse Lettelse Academy 6131900

Les nedenfor 📖 manual på norsk for Westinghouse Academy 6131900 (2 sider) i kategorien Lettelse. Denne guiden var nyttig for 25 personer og ble vurdert med 3.7 stjerner i gjennomsnitt av 13 brukere

Side 1/2
MOUNTING AND WIRING INSTRUCTIONS
NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures
meet all UL specifications.
1. Turn off power at circuit box to avoid possible electric shock.
2. Identify color coding of fixture wires.
3. Refer to Figure 1 for all steps below.
4. Remove Set Screws (H) connecting Mounting Plate (C) to Canopy (G) (if necessary).
5. (If necessary) Partially thread Green Grounding Screw (E) into Side Hole (F) on Mounting Plate (C).
Box (B) using Wire Connector (D). Wrap the Wire Connector (D) with electrical tape for a Outlet
more secure connection.
7. Wrap the bare Ground Wire (A) from the fixture Canopy (G) clockwise around the Green Grounding
Screw (E) on bottom of Mounting Plate (C). Tighten Green Grounding Screw (E). Do not overtighten.
8. Connect the white wire from the fixture to the white (neutral) wire from the Outlet Box (B) using
Wire Connector (D). Wrap Wire Connector (D) with electrical tape for a more secure connection.
9. Connect the black wire from the fixture to the black (live or hot) wire from the Outlet Box (B) using
Wire Connector (D). Wrap Wire Connector (D) with electrical tape for a more secure connection.
10. Tuck wires inside Outlet Box (B) and raise Mounting Plate (C) up to Outlet Box (B). Secure Mounting
Plate (C) to Outlet Box (B) using outlet box screws (A) included with the fixture or the outlet box.
FIXTURE ASSEMBLY INSTRUCTIONS
Warning: This fixture is for indoor use only.
1. Refer to Figure 1 for the steps below.
2. Raise Canopy (G) up to Mounting Plate (C) and secure with Set Screws (H).
3.
Raise Decorative Cage (J) up to the fixture’s Shade (I) and secure with clips on the Decorative Cage (J).
4. Turn power back on at circuit box.
WARNING
Turn off electricity to the mounting site before beginning installation.
Mounting instructions must be followed exactly as shown for the fixture to be safely supported.
CLEANING AND CARE
To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from chemical cleaners can
discolor the finish of fixture. Do not use scouring pads, powders, steel wool or abrasive paper to
clean this fixture.
ADJUSTING LENGTH OF CORD
These steps should only be performed by someone familiar with working with electrical wiring. Care
must be taken when adjusting the length of the cord to ensure insulation on internal wires is not
damaged. If not familiar with these steps, seek the aid of a qualified electrician.
1. Remove Wire Connectors (D) connecting end of cord to wires from the Mounting Plate (C). Note
which color wires are connected in each Connector.
2. Loosen the screw in strain relief (K) until cord slides easily, being careful not to completely remove
screw. Slide canopy down cord until the fixture is the correct distance below the canopy. Tighten
the screw in the strain relief until cord does not slide.
3. Slide cord through one side of Cord Lock (L) until Cord Lock is nearly touching the top of the strain
relief (K). Slide cord through the other side of the cord lock until it locks in place.
4. Cut cord approximately two to three inches (2”-3”) above Cord Lock.
5. Leaving at least one inch (1”) of outer insulation above the Cord Lock, carefully cut through outer
insulation of cord, being careful not to damage inner insulation. Remove outer insulation. Strip
inner insulation from end of both wires, leaving approximately 1/2 inch of wire exposed.
6. Attach new cord ends to the wires from the box attached to the Mounting Plate (C), using Wire
Connectors (D) removed earlier, matching colors as previously noted. Tape Connectors for more
secure connection.
ORDERING PARTS
Keep this manual for future reference, and in case replacement parts are needed. Available parts can
be ordered from place of purchase. Use exact wording from diagrams when ordering parts.
*OUTLET
BOX (B)
MOUNTING
PLATE (C)
CANOPY (G)
SHADE (I)
DECORATIVE
CAGE (J)
GREEN
GROUNDING
SCREW (E)
WIRE
CONNECTORS (D)
WIRE
CONNECTORS (M)
STRAIN RELIEF (K)
*GROUND
WIRE (A)
*OUTLET BOX
SCREWS (A)
SET SCREW (H)
CORD LOCK (L)
SIDE
HOLE (F)
*NOT SUPPLIED
FIGURE 1.
*BOITE DE SORTIE
DE COURANT (B)
PLAQUE DE
MONTAGE (C)
SERRE-CÂBLE (K)
CHAPEAU (G)
ABAT-JOUR (I)
FILET
DÉCORATIF (J)
VIS DE MISE
A LA TERRE
(VERTE) (E)
CONNECTEURS
DE FIL (D)
CONNECTEURS (M)
*FIL DE MISE
A LA TERRE (A)
*VIS DE LA BOITE DE
SORTIE DE COURANT (A)
VIS DE
CALAGE (H)
DISPOSITIF DE BLOCAGE
DU CORDON (L)
TROU
LATERAL (F)
*NON FOURNI
FIGURE 1.
W-773
092822
ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHTING FIXTURE
Congratulations on your Westinghouse purchase. This fixture has been designed to give you many
years of beauty and service. For questions and comments, please visit www.westinghouselighting.
com/contact-us.
NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any pack-
ing materials (see figure 1).
Owners Manual
LED Indoor Lighting Fixture
Installation Instructions
FIXTURE WARRANTY
This Westinghouse lighting fixture is warranted against defects in material and workmanship for a period
of five years from purchase date. This warranty is in lieu of all other warranties expressed or implied.
This warranty does not cover acts of nature such as lightening damage, or corrosion and discoloration
of components, nor does it cover damages caused through abuse, improver installation, surges in
electric current, or acts of third parties.
This warranty does not cover the costs of removing and re-installing the lighting fixture.
If this product fails for any reason covered by this warranty, please contact us at www.westinghouse-
lighting.com/contact-us.
WARNING:
ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY.
Read and follow instructions exactly as shown. If instructions are unclear, do not proceed.
Contact a qualified electrician. Read all instructions before beginning. Proper wiring is essen-
tial for safe operation of this fixture. When cutting or drilling into walls or ceilings, do not dam-
age electrical wiring, gas lines, or water lines. If any of the fixture or wiring components are
damaged, do not install fixture. Return to place of purchase.
For fixtures provided with 75° C or 90° C supply wire warning only. (These warnings are provid-
ed on the U.L. label and on the fixture carton.) Risk of fire. Most dwellings built before 1985
have supply wires rated 60° C. Consult a qualified electrician before installing.
Guide d’utilisation
Instructions d’installation
Appareil d’éclairage pour utilisation intérieure avec DEL
LES INSTRUCTIONS D’ASSEMBLAGE DE LAPPAREIL D’ÉCLAIRAGE POUR UTILISATION INTÉRIEURE
Félicitations ! Vous avez acheté un produit de Westinghouse Lighting. Cet appareil d’éclairage a été
conçu pour durer de nombreuses années. Si vous avez des questions ou des commentaires à
nous communiquer, veuillez visiter www.westinghouselighting.com/contact-us.
NOTA : Déballez soigneusement l’appareil d’éclairage et les pièces. Assurez-vous que toutes les pièces
y sont avant de mettre l’emballage au rebut (voir fig. 1).
GARANTIE LIMITÉE DE CINQ ANS
Ce luminaire Westinghouse est garanti pièces et main-doeuvre pour une période de Cinq ans à compter
de la date d’achat. Cette garantie remplace toute autre garantie, explicite ou implicite.
Cette garantie ne couvre pas les phénomènes naturels comme les dommages de la foudre, ni la corro-
sion ou la décoloration des composants, pas plus qu’elle ne couvre les dommages causés par les abus,
une installation inappropriée, les surtensions électriques ou les actes de tiers.
Cette garantie ne couvre pas les coûts de dépose et de pose du luminaire.
En cas de défaillance du produit, pour une raison quelconque, couverte par cette garantie, veuillez
nous contacter via www.westinghouselighting.com/contact-us.
MISE EN GARDE: L’ÉLECTROCUTION POURRAIT CAUSER DE GRAVES BLESSURES PERSONNELLES.
Lisez ces instructions et suivez-les exactement comme illustré. En cas de doute, ne commencez
pas l’installation. Consultez un électricien qualifié. Lisez toutes les instructions avant de com-
mencer l’installation. Un câblage approprié est essentiel au bon fonctionnement de cet appareil
d’éclairage. Lorsque vous faites une entaille ou que vous percez un trou dans un mur ou un
plafond, nendommagez pas les câbles électriques, les canalisations de gaz ou d’eau. Si l’un des
composants de raccordement ou de l’appareil d’éclairage est endommagé, ninstallez pas cet
appareil d’éclairage. Retournez-le à l’endroit où vous l’avez acheté.
Convient uniquement aux appareils comportant un avertissement indiquant que l’appareil
d’éclairage est doté d’un fil supportant une chaleur de 75°C ou 90°C. (Ces avertissements se
trouvent sur l’étiquette U.L. et sur l’emballage de l’appareil déclairage.)
Line art shown may not exactly match the fixture enclosed.
However, the installation instructions do apply to this fixture.
Il est possible que le dessin illustré ici ne soit pas la reproduction exacte de l’appareil
d’éclairage contenu dans la boîte.
Les instructions d’installation demeurent cependant valables.
Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. www.westinghouselighting.com
and Westinghouse are trademarks of Westinghouse Electric Corporation.
Used under license by Westinghouse Lighting. All Rights Reserved. Made in China
NOTE: THIS FIXTURE IS SUITABLE FOR USE WITH DIMMABLE SWITCHES, SEE BELOW FOR LIST OF
COMPATIBLE DIMMERS.
Brand Model # DIMMING Range
Lutron DVCL-153P, MACL-153M, PD-6WCL, MRF2-6CL, 10-100%
TGCL-153PH-WH-C, SCL-153P, DVCL-253P, CTCL-153P
Leviton DDL06-1LZ, DSL06-1LZ, 6674-10W, IPL06-10Z, 10-100%
RNL06-10Z, TSL06 -1LW
Not recommended for use with motion sensors, light sensors, timers or any other external controls.

Produkspesifikasjoner

Merke: Westinghouse
Kategori: Lettelse
Modell: Academy 6131900

Trenger du hjelp?

Hvis du trenger hjelp med Westinghouse Academy 6131900 still et spørsmål nedenfor, og andre brukere vil svare deg