ADDAC System ADDAC507 Bruksanvisning

Les nedenfor 📖 manual på norsk for ADDAC System ADDAC507 (9 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 24 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/9
March.2024
USER’S GUIDE . REV01
A collaboration with:
MONOTRAIL
ADDAC507
RANDOM
BÉZIER
WAVES
INTRODUCING
From Portugal with Love!
Instruments for Sonic Expression
Est.2009
ADDAC507
RANDOM BÉZIER WAVES USER’S GUIDE
March.2024Revision.01
Welcome to:
page 2ADDAC SYSTEM
WELCOME
This module started with an idea from Rijnder Kamerbeek aka Monotrail,
a straightforward random generator with interpolation between random
points making it something like a complex, ever evolving, LFO
The concept is simple. It contains two identical smooth random voltage
generators. Each has a frequency, level, offset and curve control. The
frequency control sets a steady pace with which bipolar random
voltages are generated. The level control works like an attenuator/VCA
on the output, reaching from max output to closed. The offset allows
shifting the whole wave up and down on the voltage range. Curve
determines the shape of the interpolation.The bipolar activity on the
main outputs as well as gate outputs are visualised with LEDs.
Both Frequency and Level controls have a CV input with attenuator.
When there is nothing patched into the CV inputs, these are internally
connected to the main output of the other channel. This normalization
makes it very easy to add randomization to the frequency or level for
more depth, or of course, add cross-modulation for chaotic voltages.
The output VCAs are usefull to dial in subtle and time-based modulation
without the need for external VCAs. For example, to modulate the
amount over time with an envelope, or use the other generator with
slower speeds to add random changes to the level of a random
voltage.
Both generators also have two other outputs. One is an exact inversion
of the main output, so it responds to the level and CV input. This is
great for stereo or inversed effect patches. The other is a simple pulse
output, here there are two different behaviours, channel A outputs a
pulse at every random generation, channel B acts like a comparator.
Whenever the main is positive this comparator output is a high gate.
And whenever the main output is negative or close to 0, there is no
gate output. Great for random triggers or firing other events like
envelopes.
A couple other outputs are also available and are obtained by averaging
both channel main outputs. The first output is the average while the
second is an inverted average.
Tech Specs:
10HP
4.5cm deep
70mA +12V
40mA -12V
CHANNEL A CHANNEL B
ADDAC507 User’s Guide
page 3ADDAC SYSTEM
CONTROLS DESCRIPTION
[FREQUENCY] sets the cycle/interval time between random
steps, At every cycle a new random voltage is generated.
It will then interpolate from the current value to the newly
generated value during the cycle time.
[LEVEL] sets the voltage output range, with a maximum
range of ±5V
[LIMIT/FOLD/THRU] sets what happens when the voltage hits
the maximum range:
LIMIT: limits the value to the maximum ±5v
FOLD: folds the voltage like a standard wavefolder. In this
setting the output voltage range is multiplied by 2 to allow
more folds to happen.
THRU: voltage gets inverted and appears at the other polarity.
[OFFSET] moves the whole voltage output up or down with a
maximum range of ±5V
[CURVE] sets the interpolation Bézier control points from
exponential to linear to logarithmic.
+5v
-5v
0v
LIMIT
+5v
-5v
0v
FOLD
+5v
-5v
0v
THRU
+5v
-5v
0v
WAVE OUTPUT
FREQUENCY CYCLE
CURRENT
VALUE
NEXT
VALUE
INTERPOLATION

Produkspesifikasjoner

Merke: ADDAC System
Kategori: Ikke kategorisert
Modell: ADDAC507

Trenger du hjelp?

Hvis du trenger hjelp med ADDAC System ADDAC507 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert ADDAC System Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer