Atdec AD-WF-10090 Bruksanvisning

Atdec Flatpanelstøtte AD-WF-10090

Les nedenfor 📖 manual på norsk for Atdec AD-WF-10090 (2 sider) i kategorien Flatpanelstøtte. Denne guiden var nyttig for 28 personer og ble vurdert med 4.4 stjerner i gjennomsnitt av 14.5 brukere

Last ned PDF

Side 1/2

AD-WF-10090 Page 1 of 2

Wall Plate

Display Bracket (x2)

M-G

Short

Spacer

(x8)

M-H

Long

Spacer

(x8)

M-F

Multi

Washer

(x4)

M-D

M8x30

Screw

(x4)

M-B

M6x14

Screw

(x4)

M-A

M5x14

Screw

(x4)

M-C

M6x30

Screw

(x4)

M-E

M8x50

Screw

(x4)

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! The manufacturer accepts no responsibility for incorrect installation.

! Failure to mount this product correctly may cause serious injury/death during or following installation.

! This product is not suitable for outdoor use.

! Do not use this product for mobile applications.

! Wall Plate only achieves maximum weight rating when appropriately fastened to a wall of adequate structural capacity.

! Professional installer to ensure adequate structural capacity of wall (including appropriate safety factor) to support total

weight of all equipment being mounted.

! Drilling into electrical wires can cause death - use appropriate equipment and caution when drilling holes in walls to avoid

electrical cables, water pipes and gas pipes. Do not drill into structures unless you have established it’s safe to do so.

COMPONENT CHECKLIST

NOTE:

! Wall Plate Mounting Fasteners are NOT supplied with Wall Mounts.

Professional installer to ensure correct Mounting Fastener type, location &

quantity to suit structure where Wall Mount is installed.

! ALWAYS use a washer between the chosen fastener and the wall plate.

! Mounting fasteners to be used as per manufacturers instructions, including

minimum engagement to achieve necessary performance.

0 - 100kg

(0 - 220lb)

WEIGHT RANGE

Installation Guide

AD-WF-10090

Fixed Wall Mount 10090

REQUIRED TOOLS

• Phillips head screwdriver

• Power drill

• Suitable drill bit

• Driver bit for selected

wall fasteners

• Stud nder

• Spirit level

Produkspesifikasjoner

Merke:	Atdec
Kategori:	Flatpanelstøtte
Modell:	AD-WF-10090
Bredde:	1003 mm
Høyde:	630 mm
Pakkevekt:	5307 g
Maksimal skjermstørrelse:	- "
Antall monteringsbraketter:	2
Produktfarge:	Sort
Pakkedybde:	1115.06 mm
Pakkehøyde:	40.64 mm
Pakkebredde:	416.56 mm
Kroppsmateriale:	Stål
Panelmonterbart grensesnitt:	100 x 200,200 x 200,200 x 300,200 x 400,200 x 600,300 x 200,300 x 300,400 x 200,400 x 300,400 x 400,400 x 600,600 x 200,600 x 400,800 x 200,800 x 400,800 x 600,900 x 600 mm
Monteringsbeslag inkludert:	Ja
Montasjetype:	Vegg
Maksimalvekt (kapasitet):	100 kg
Masterkassens (ytterkassens) bruttovekt:	24947 g
Masterkassens (ytterkassens) lengde:	1130.3 mm
Produkter per masterkasse (ytterkasse):	4 stykker
Masterkassens (ytterkassens) bredde:	431.8 mm
Masterkassens (ytterkassens) høyde:	180.34 mm
Monteringsgrensesnitt, kompatibilitet (min):	100 x 200 mm
Monteringsgrensesnitt, kompatibilitet (maks):	900 x 600 mm
Lett å justere:	Ja
Distanse til vegg (maks.):	32 mm
Distanse til vegg (min.):	32 mm
Antall bolter:	20
Bolter medfølger:	Ja