Atdec AD-WT-8060 Bruksanvisning

Atdec Flatpanelstøtte AD-WT-8060

Les nedenfor 📖 manual på norsk for Atdec AD-WT-8060 (4 sider) i kategorien Flatpanelstøtte. Denne guiden var nyttig for 32 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 16.5 brukere

Last ned PDF

Side 1/4

AD-WT-8060 Page 1 of 4

Installation Guide

AD-WT-8060

Tilt Wall Mount 8060

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! The manufacturer accepts no responsibility for incorrect installation.

! Failure to mount this product correctly may cause serious injury/death during or following installation.

! This product is not suitable for outdoor use.

! Do not use this product for mobile applications.

! Wall Plate only achieves maximum weight rating when appropriately fastened to a wall of adequate structural capacity.

! Professional installer to ensure adequate structural capacity of wall (including appropriate safety factor) to support total

weight of all equipment being mounted.

! Drilling into electrical wires can cause death - use appropriate equipment and caution when drilling holes in walls to avoid

electrical cables, water pipes and gas pipes. Do not drill into structures unless you have established it’s safe to do so.

M-C

M6x30

Screw

(x4)

M-B

M6x14

Screw

(x4)

M-D

M8x30

Screw

(x4)

M-A

M5x14

Screw

(x4)

M-F

Multi

Washer

(x4)

M-G

Short

Spacer

(x8)

M-E

M8x50

Screw

(x4)

Display Bracket (left)

Display Bracket (right)

Wall Plate

Security Bar

M-H

Long

Spacer

(x8)

Hex Key

REQUIRED TOOLS

• Phillips head screwdriver

• Power drill

• Suitable drill bit

• Driver bit for selected

wall fasteners

• Stud nder

• Spirit level

• Socket wrench set

COMPONENT CHECKLIST

0 - 80kg

(0 - 176lb)

WEIGHT RANGE

NOTE:

! Wall Plate Mounting Fasteners are NOT supplied with Wall Mounts.

Professional installer to ensure correct Mounting Fastener type, location &

quantity to suit structure where Wall Mount is installed.

! ALWAYS use a washer between the chosen fastener and the wall plate.

! Mounting fasteners to be used as per manufacturers instructions, including

minimum engagement to achieve necessary performance.

Produkspesifikasjoner

Merke:	Atdec
Kategori:	Flatpanelstøtte
Modell:	AD-WT-8060
Bredde:	701 mm
Dybde:	50 mm
Høyde:	440 mm
Pakkevekt:	4128 g
Antall per pakke:	1 par
Antall skjermer som støttes:	1
Maksimal skjermstørrelse:	- "
Høydejustering:	Nei
Produktfarge:	Sort
Vippevinkelområde:	-10 - 5 °
Pakkedybde:	767 mm
Pakkehøyde:	71 mm
Pakkebredde:	236 mm
Kroppsmateriale:	Stål
Panelmonterbart grensesnitt:	100 x 100,100 x 150,100 x 200,120 x 120,120 x 180,200 x 100,200 x 200,200 x 300,200 x 400,280 x 150,300 x 300,300 x 200,400 x 200,400 x 400,400 x 300,600 x 200,600 x 400 mm
Vippjustering:	Ja
Montasjetype:	Vegg
Maksimalvekt (kapasitet):	80 kg
Monteringsgrensesnitt, kompatibilitet (min):	100 x 100 mm
Monteringsgrensesnitt, kompatibilitet (maks):	600 x 400 mm
Distanse til vegg (maks.):	50 mm
Distanse til vegg (min.):	50 mm
Rotering:	Nei