Atdec TH-1040-CT-B2B Bruksanvisning
Atdec
Flatpanelstøtte
TH-1040-CT-B2B
Les nedenfor 📖 manual på norsk for Atdec TH-1040-CT-B2B (1 sider) i kategorien Flatpanelstøtte. Denne guiden var nyttig for 2 personer og ble vurdert med 4.0 stjerner i gjennomsnitt av 1.5 brukere
Side 1/1
! This product is to be installed in conjunction with TH-1040-CTS and TH-1040-CTL Ceiling Mounts only.
Component Checklist
Mount Head
Accessory
VESA Plate
TH-1040-CT-B2B
Back to Back Accessory for TH-1040-CTS and TH-1040-CTL
IMPORTANT INFORMATION:
Step 1. Check Components
Check you have received all parts against the Component Checklist and Hardware above.
Step 2. Remove Back of Existing Mount Head
Step 3. Install Mount Head Accessory
! IMPORTANT - Install 1040 Back to Back Accessory as per Installation Instructions.
Hardware
! The manufacturer accepts no responsibility for incorrect installation.
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 30
.09.11 ©
Installation Complete
Fully installed TH-1040-CTS or
TH-1040-CTL (VESA Plate removed).
M4x16/25mm
(x4 each)
M5x16/25mm
(x4 each)
M6x16/30mm
(x4 each)
Refer to TH-1040-CTS/TH-1040-CTL Installation Instructions, Step 8. Attach VESA Plate to Display.
M4/5 Washer
(x4)
M4/5 Spacer (x4)
M6/8 Spacer (x4)
Security Screw
(optional)
Display
Mounting
Screws
5mm/3mm
Allen Keys
(x1 each)
NOTE: Phillips-head
screwdriver not supplied
5mm Allen Key
Socket Cap Screw
Back
REMOVE
Socket Cap
Screw
Use the 5mm
Allen Key supplied.
Keep Socket Cap Screws for Step 3.
Remove back half of the existing
Mount Head by removing
Socket Cap Screws (x2).
Socket Cap Screw
5mm Allen Key
Mount Head
Accessory
Socket Cap Screw
Attach the Mount Head
Accessory with
the Socket
Cap Screws (x2).
Tighten screws firmly
and .equally
Installation Instructions
Produkspesifikasjoner
| Merke: | Atdec |
| Kategori: | Flatpanelstøtte |
| Modell: | TH-1040-CT-B2B |
Trenger du hjelp?
Hvis du trenger hjelp med Atdec TH-1040-CT-B2B still et spørsmål nedenfor, og andre brukere vil svare deg
Flatpanelstøtte Atdec Manualer
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
Flatpanelstøtte Manualer
- Nabo
- Tripp Lite
- Tracer
- Helder
- Mount-It!
- Insignia
- Ateca
- Premier Mounts
- SunBriteTV
- StarTech.com
- Kanto
- Ultimate
- Proaim
- Ergotron
- Vogels
Nyeste Flatpanelstøtte Manualer
5 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
30 September 2025
29 September 2025
22 September 2025
22 September 2025
22 September 2025
21 September 2025