Atlas ALA10T Bruksanvisning

Atlas Høyttaler ALA10T

Les nedenfor 📖 manual på norsk for Atlas ALA10T (6 sider) i kategorien Høyttaler. Denne guiden var nyttig for 6 personer og ble vurdert med 4.4 stjerner i gjennomsnitt av 3.5 brukere

Last ned PDF

Side 1/6

1/6

AtlasIED.com

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

1601 JACK MCKAY BLVD.

ENNIS, TEXAS 75119 U.S.A.

©2015 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005347 RevA 12/15

Safety Instructions

Please read carefully before installing or operating.

• Read all instructions carefully

• Heed all warnings

• Assure that the speaker is securely mounted

• Always assure amplifier power is off before making any connections

• Keep instructions for future reference

• Should any questions arise after reading this document, please call Atlas Sound Tech Support at 800-876-3333

Hearing Damage

CAUTION: All professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement and operation to

avoid exposure to excessive levels that can cause permanent hearing damage.

Suspension and Mounting

Installing speaker systems requires training and expertise. Improper speaker installation may result in injury, death, equipment damage, and legal

liability. Installation must be carried out by fully qualified installers, in accordance with all required safety codes and standards at the place of

installation.

Legal requirements for overhead installation vary by municipality, please consult the Building Inspector office before installing any product and

thoroughly check any laws and bylaws prior to installation. Installers that lack the skills, training, and proper ancillary equipment to install a speaker

system should not attempt to do so.

Installation

1. Run the wiring from the power amplifier to the location desired for mounting the ALA Series speaker.

2. Attach the lower wall bracket to the wall. Use a level to be certain that the wall bracket is straight. Secure the wall bracket to the wall. Be sure to

use the appropriate wall anchors when attaching the bracket. Use all four screw holes for maximum integrity and safety.

Note: Hardware for attaching the wall bracket to the wall is not included.

ALA10T

Installation Instructions

Fig. 1

Produkspesifikasjoner

Merke:	Atlas
Kategori:	Høyttaler
Modell:	ALA10T
Bredde:	117 mm
Dybde:	137 mm
Høyde:	835 mm
Bluetooth:	Nei
Tilkoblingsteknologi:	Koblet med ledninger (ikke trådløs)
Anbefalt bruk:	Universell
Impedans:	8 Ω
Høyttalerplassering:	Stand-mountable, Wall-mountable
Forsterker:	Nei
Diskanthøyttaler:	Ja
Produktfarge:	Sølv
Kroppsmateriale:	Aluminium
Internasjonal beskyttelses (IP)-kode:	IP32
Lyd-utgang kanaler:	- kanaler
RMS-rangert strøm/utgangseffekt:	600 W
Antall drivere:	14
Frekvensrekkevidde:	125 - 20000 Hz
Diskant diameter:	25 mm
Sensitivitet/følsomhet:	96 dB
Diameter på mellomtone-driver:	76 mm
Diskanthøyttalerens diameter:	1 "
Diameter på mellomtone-driver (imperisk):	3 "
Overgangsfrekvens:	3500 Hz
Driverdiameter:	76 mm
Antall drivere til diskant:	4
Antall mellomtonedrivere:	10