Atlas ALA5T Bruksanvisning

Les nedenfor 📖 manual på norsk for Atlas ALA5T (4 sider) i kategorien Høyttaler. Denne guiden var nyttig for 10 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 5.5 brukere

Side 1/4
1/4
AtlasIED.com
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
©2015 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005301 RevB 11/15
Safety Instructions
Please read carefully before installing or operating.
Read all instructions carefully
Heed all warnings
Assure that the speaker is securely mounted
Always assure amplifier power is off before making any connections
Keep instructions for future reference
Should any questions arise after reading this document, please call Atlas Sound Tech Support at 800-876-3333
Hearing Damage
CAUTION: All professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement and operation to
avoid exposure to excessive levels that can cause permanent hearing damage.
Suspension and Mounting
Installing speaker systems requires training and expertise. Improper speaker installation may result in injury, death, equipment damage, and legal
liability. Installation must be carried out by fully qualified installers, in accordance with all required safety codes and standards at the place of
installation.
Legal requirements for overhead installation vary by municipality, please consult the Building Inspector office before installing any product and
thoroughly check any laws and bylaws prior to installation. Installers that lack the skills, training, and proper ancillary equipment to install a speaker
system should not attempt to do so.
Installation
1. Run the wiring from the power amplifier to the location desired for mounting the ALA Series speaker.
2. Attach the wall bracket to the wall. Use a level to be certain that the wall bracket is straight. Secure the wall bracket to the wall. Be sure to use
the appropriate wall anchors when attaching the bracket. Use all four screw holes for maximum integrity and safety.
Note: Hardware for attaching the wall bracket to the wall is not included.
3. Attach the short or medium length speaker bracket to the speaker sliding mount block. Use the short bracket for 0° to 17°. Use the medium
bracket for 17° to 26°.
A. Position the speaker bracket over the sliding mount block as shown in Fig. 2a and 2b.
B. Insert the 100mm M8 bolt through the speaker bracket and the sliding mount block. Be sure to include the plain washers and one lock washer
as shown.
ALA5T
Installation Instructions
Fig. 1

Produkspesifikasjoner

Merke: Atlas
Kategori: Høyttaler
Modell: ALA5T
Bredde: 117 mm
Dybde: 137 mm
Høyde: 422 mm
Bluetooth: Nei
Tilkoblingsteknologi: Koblet med ledninger (ikke trådløs)
Anbefalt bruk: Universell
Impedans: 8 Ω
Høyttalerplassering: Stand-mountable, Wall-mountable
Forsterker: Nei
Diskanthøyttaler: Ja
Produktfarge: Sølv
Kroppsmateriale: Aluminium
Internasjonal beskyttelses (IP)-kode: IP32
Lyd-utgang kanaler: - kanaler
RMS-rangert strøm/utgangseffekt: 125 W
Antall drivere: 7
Frekvensrekkevidde: 125 - 20000 Hz
Diskant diameter: 25 mm
Sensitivitet/følsomhet: 92 dB
Diameter på mellomtone-driver: 76 mm
Diskanthøyttalerens diameter: 1 "
Diameter på mellomtone-driver (imperisk): 3 "
Overgangsfrekvens: 3500 Hz
Driverdiameter: 76 mm
Antall drivere til diskant: 2
Antall mellomtonedrivere: 5

Trenger du hjelp?

Hvis du trenger hjelp med Atlas ALA5T still et spørsmål nedenfor, og andre brukere vil svare deg