Black Decker F1060 Bruksanvisning

Les nedenfor 📖 manual på norsk for Black Decker F1060 (15 sider) i kategorien strykejern. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/15
Please Read and Save this Use and Care Book
Por favor lea este instructivo antes de usar el producto
Veuillez lire et conserver ce guide d’entretien et d’utilisation
Models
Modelos
Modèles
F1000
F1050
F1055
F1060
F1065
Steam Advantage
®
Iron
Plancha
Fer à repasser
Register your product online at
www.prodprotect.com/applica,
for a chance to WIN $100,000!
For US residents only
Registre su producto por Internet en
www.prodprotect.com/applica y tendrá la
oportunidad de GANAR $100,000!
Solamente para residentes de EE.UU
Inscrivez votre produit en ligne à l'adresse
www.prodprotect.com/applica
et courez la chance de GAGNER 100 000 $!
Aux résidents du É.-U seulement
USA/Canada 1-800-231-9786
http://www.prodprotect.com/applica
Accessories/Parts (USA/Canada)
Accesorios/Partes (EE.UU/Canadá)
Accessoires/Pièces (É.-U./Canada)
1-800-738-0245
21
IMPORTANT SAFEGUARDS
When using your iron, basic safety precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING.
Use iron only for its intended use.
To protect against a risk of electric shock, do not immerse the iron in
water or other liquids.
The iron should always be turned to “0” before plugging or unplugging
from outlet. Never yank cord to disconnect from outlet; instead grasp plug
and pull to disconnect.
Do not allow cord to touch hot surfaces. Let iron cool completely before
putting away. Loop cord loosely around the iron when storing.
Always disconnect iron from electrical outlet when filling with water or
emptying and when not in use.
Do not operate iron with a damaged cord or if the iron has been dropped
or damaged. To avoid the risk of electric shock, do not disassemble
the iron, take it to a qualified serviceman for examination and repair.
Incorrect reassembly can cause a risk of electric shock when the iron is
used.
Close supervision is necessary for any appliance being used by or near
children. Do not leave iron unattended while connected or on an ironing
board.
Burns can occur from touching hot metal parts, hot water or steam. Use
caution when you turn a steam iron upside down- there may be hot water
in the reservoir.
SPECIAL INSTRUCTIONS
To avoid a circuit overload, do not operate another high-wattage
appliance on the same circuit.
If an extension cord is absolutely necessary, a 15-ampere cord should be
used. Cords rated for less amperage may overheat. Care should be taken
to arrange the cord so that it cannot be pulled or tripped over.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to prevent
removal of the outer cover. To reduce the risk of fire or electric shock, do not
attempt to remove the outer cover. There are no user-serviceable parts inside.
Repair should be done only by authorized service personnel.
Note: If the power supply cord is damaged, it should be replaced by qualified
personnel. In Latin America, by an authorized service center.
4
How to Use
This appliance is intended for household use only.
GETTING STARTED
Remove any labels, stickers or tags attached to the body or soleplate of the iron.
Note: Use ordinary tap water for ironing. Do not use water processed through a
home softening system
Important: For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
FILLING WATER TANK
1. With iron on flat surface with soleplate down, open
water-fill cover (A).
2. Tilt the iron and using a clean measuring cup, pour water
into opened chamber until water reaches the MAX level
mark on the side of the water tank. Do not overfill.
3. Close the water-fill cover.
4. Plug in the iron. The on indicator light illuminates (B). Once
the iron reaches the selected temperature, the light goes off.
The light will then cycle on an off during ironing.
Note: If you need to add water while ironing, unplug the iron
and follow above steps.
Tip: If unsure of a garment's fiber, test a small area (on an inside seam or hem)
before ironing.
3-WAY AUTOMATIC SHUTOFF
The automatic shutoff feature in your iron works as follows:
• Once the iron reaches appropriate temperature, it will turn
off after 30 seconds of inactivity if left on its soleplate or
tipped over on its side. If left vertically on its heel rest, it will
shut off after 8 minutes (C).
The AUTO OFF light starts blinking red to let you know that
the iron has stopped heating (D).
As soon as you pick up the iron, it will start heating
again. Wait for iron to reheat completely before resuming
operation.
SMART STEAM
®
TECHNOLOGY
The Smart Steam
®
system automatically produces steam when you turn the fabric-
select dial between settings 4 and 6. The higher the setting, the more powerful the
steam.
3
Product may vary slightly from what is illustrated.
1. Spray nozzle
2. Water-fill cover
3. Fabric-select dial
4. Steam button
5. Spray button
6. On/auto off indicator light
7. Comfort Grip
handle
8. 360° pivoting cord
9. Anti-slip, rubberized heel
10. Fabric guide
11. Water tank
12. AUTO CLEAN
®
button
13. Soleplate
A
B
D
CLEAN
MAX
MIN
Dry
Steam/Blast of Steam
Spray
Symbols
C
8 minutes
30 seconds

Produkspesifikasjoner

Merke: Black Decker
Kategori: strykejern
Modell: F1060

Trenger du hjelp?

Hvis du trenger hjelp med Black Decker F1060 still et spørsmål nedenfor, og andre brukere vil svare deg




strykejern Black Decker Manualer

strykejern Manualer

Nyeste strykejern Manualer