Bobrick B-6977 Bruksanvisning
Bobrick
Ikke kategorisert
B-6977
Les nedenfor 📖 manual på norsk for Bobrick B-6977 (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 31 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 16 brukere
Side 1/1
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 8/10/18 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2018 by Bobrick Washroom Equipment, Inc.
Technical Data
Finish Face of Wall
1-7/8''
50mm
1-7/8''
50mm
5''
125mm
Mounting Clamp
Countersunk
Mounting
Holes (4)
12-5/16''
315mm
11-3/16''
285mm
6-1/8''
155mm
9/16''
14mm
Typ.
Specify Model Required:
Model B-697 Bright polished stainless steel
Model B-6977 Satin-finish stainless steel
MATERIALS:
Shell and Flange — 18-8, Type-304, 22-gauge (0.8mm) stainless steel. Drawn, one-piece, seamless construction with four
countersunk mounting holes.
Support Posts (4) — Heavy-duty cast zamak with chrome-plated finish.
Mounting Bracket — Plated-steel mounting clamp attaches to back of unit with four sheet-metal screws for installation in stud
walls or countertop aprons.
Spindles (2) — Chrome-plated plastic equipped with heavy-duty internal springs.
Designer's Note: Theft-resistant toilet tissue spindles, which are removable only with special key provided, are available as an
optional accessory - part no. 283-604.
INSTALLATION:
Provide framed rough opening 11-3/4" wide x 5-1/4" high (300 x 135mm). Minimum recessed depth required from finish face
of wall or apron is 3-3/8" (85mm).
For installation in stud walls or countertop aprons without backing, loosely attach mounting clamp to back of unit with
sheet-metal mounting screws. Insert into rough opening. Adjust mounting clamp so it grips surface inside rough opening.
Secure in place by tightening four sheet-metal mounting screws.
For installation in stud walls or countertop aprons with backing, discard mounting clamp furnished with unit. Insert unit only
into rough opening and secure with sheet-metal screws furnished. Backing must comply with local building codes.
SPECIFICATION:
Recessed dual-roll toilet tissue dispenser shall be Type-304, 22-gauge (0.8mm) stainless steel with __________ (insert one:
bright polished or satin) finish. Shell and flange shall be drawn, one-piece, seamless construction. Unit shall be furnished with
plated-steel mounting clamp for stud walls and countertop aprons.
c
Spindles shall be chrome-plated plastic with heavy-duty
internal springs.
c
To specify theft-resistant spindles as an optional accessory, add to specification: Theft-resistant toilet tissue spindles shall be
removable only with special key provided.
Recessed Dual-Roll Toilet Tissue Dispenser shall be Model __________ (insert model number) of Bobrick
Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick
Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and
Bobrick Washroom Equipment Limited, United Kingdom.
Rough Opening
11-3/4" (300mm) wide
5-1/4" (135mm) high
3-3/8" (85mm) minimum
recessed depth
RECESSED DUAL‑ROLL
TOILET TISSUE DISPENSER
(FOR STUD WALLS OR COUNTERTOP APRONS)
B‑697
B‑6977
Produkspesifikasjoner
| Merke: | Bobrick |
| Kategori: | Ikke kategorisert |
| Modell: | B-6977 |
Trenger du hjelp?
Hvis du trenger hjelp med Bobrick B-6977 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Bobrick Manualer
8 April 2025
8 April 2025
8 April 2025
8 April 2025
8 April 2025
8 April 2025
8 April 2025
8 April 2025
8 April 2025
8 April 2025
Ikke kategorisert Manualer
- Bellari
- X-Lite
- Uniprodo
- Balam Rush
- Nikon
- Maytag
- Silvercrest
- Primera
- Neumann
- Drayton
- FeiyuTech
- Playtive
- Deltaco Gaming
- Gamewright
- Envertec
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025