Craftbot Plus Bruksanvisning
Craftbot
3D-skriver
Plus
Les nedenfor 📖 manual på norsk for Craftbot Plus (2 sider) i kategorien 3D-skriver. Denne guiden var nyttig for 23 personer og ble vurdert med 4.4 stjerner i gjennomsnitt av 12 brukere
Side 1/2
QUICK START GUIDE
Thank you for purchasing a CraftUnique product and welcome to the world of 3D crafting!
You are just a few steps away from having your rst 3D object printed by your brand new CraftBot.
I. UNPACKING
Step #1
You’ve already found the Quick Start Guide. Excellent! Now remove the large sheet resting under the foam.
Under the sheet you will nd your CraftBot attachable accessories in a cardboard cradle resting in the cavity
of the CraftBot 3D printer.
Step #2
Remove this cradle from the box with care and place it in a safe out-of-the-way place.
Step #3
The printer is wrapped in a tight tting plastic protective cover. Open up the covering.
Firmly grasp the frame of the CraftBot and lift it out of the box without touching the fragile inner parts.
CraftBot weights 14 kg (almost 31 lbs) – seek assistance if needed!
Step #4
Place the printer on a stable and level surface with sucient space around.
II. ACCESSORY CHECK
It’s time to unpack additional parts.
Below you can see the contents of the
box. First of all, check the list to make
sure nothing is missing!
1. Filament guide tube holder
2. Filament guide tube
3. Filament spool holder
4. Filament spool
5. Hex wrenches (5x)
6. USB Flash storage
7. USB A-B cable and AC power cable
8. Filament monitoring system (FMS)*
1
4
7
2
5
8
3
6
1 2 3 4
PLUG&PLAY 3D PRINTER
WITH 5 YEARS WARRANTY
WWW.CRAFTBOT.COM • WWW.CRAFTBOTUSA.COM
Produkspesifikasjoner
| Merke: | Craftbot |
| Kategori: | 3D-skriver |
| Modell: | Plus |
Trenger du hjelp?
Hvis du trenger hjelp med Craftbot Plus still et spørsmål nedenfor, og andre brukere vil svare deg
3D-skriver Craftbot Manualer
23 Januar 2025
23 Januar 2025
20 Oktober 2024
3D-skriver Manualer
- Kodak
- Renkforce
- Wasp
- Monoprice
- MakerBot
- Raise3D
- Creality
- Creality3D
- Flashforge
- LulzBot
- Orbbec
- Snapmaker
Nyeste 3D-skriver Manualer
27 September 2025
19 August 2025
4 August 2025
4 August 2025
3 August 2025
3 August 2025
28 Januar 2025
25 Januar 2025
23 Januar 2025