Cudy FS1010P Bruksanvisning

Cudy Bryter FS1010P

Les nedenfor 📖 manual på norsk for Cudy FS1010P (2 sider) i kategorien Bryter. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/2
Physical Appearance2
Specifications3
Hardware Connection
1
Working Temperature
Bandwidth
Storage Temperature
Working humidity
Storage humidity
Working hight
Storage hight
-20~50
-40~80
Max relative humidity 90%, non-condensing
Max relative humidity 95%, non-condensing
Max 10,000 feet3,000 meters
Max 10,000 feet3,000 meters)
Model FS1010P
Network Protocol
PoE Standard
POE port output
Power Pin
AC Input Voltage
Output
Total Power
Dimension(L×H)
Power Socket
Ethernet Device
(switch, router, etc.)
Wireless AP Smart VoIPIP Camera
Powered Device (PD)
Internet
Front board
Back board
Ethernet PoE Port Ethernet Port
Power input port
IEEE802.3 / IEEE802.3u
IEEE802.3x / IEEE802.3af/at
IEEE802.3at (30W) and IEEE802.3af (15.4w)
DC 52V
Power over spare pairs 1/2(+) , 3/6 (-)
AC100~240V
52V ~ 2.3A
120W
200mm*120mm*45mm
8-Port 10/100M PoE+ Switch
with 2 Uplink Ports
FS1010P
1 3 5 7
Extend
Normal
VLAN
1 2 3 4 5 6 7 8 9 10PWR SW
8-Port 10/100M PoE+ Switch
with 2 Uplink Ports
FS1010P
1 3 5 7
Extend
Normal
VLAN
1 2 3 4 5 6 7 8 9 10PWR SW
NVR Monitor
Router
AC INPUT
100V-240V
MAC Address
Packet Buffer Memory
Forwarding Mode
1K MAC address table
2Gbps (non-blocking)
448K
Store-And-Forward
Q I a Guick nstall tion uide
Model: FS1010P
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The
original EU declaration of conformity may be found at http://www.cudy.com/
810600056
Email: support@cudy.com
www.cudy.com
LED and Interface Explanation
5
PWR
SW Mode
Link ACT
Power LED
DIP LED
Link LED
ON
OFF
ON
OFF
Flashing
ON
OFF
Flashing
Powered
No power
Port Isolation
Standard switching
Link extension
Link connected
Link disconnected
Link data transmitted
DIP Explanation
4
VLAN
Default
Extend
Port Isolation
Standard Switch
Link Extension
Downlink designated ports are isolated
from each other, only transmit data with
the uplink port.
All ports communicate freely
The specified port speed drops to 10Mbps/s,
max PoE transmission is 250 meters.

Produkspesifikasjoner

Merke: Cudy
Kategori: Bryter
Modell: FS1010P

Trenger du hjelp?

Hvis du trenger hjelp med Cudy FS1010P still et spørsmål nedenfor, og andre brukere vil svare deg




Bryter Cudy Manualer

Bryter Manualer

Nyeste Bryter Manualer