Elektrobock Pocket Home PH-SP1 Bruksanvisning

Elektrobock Mottaker Pocket Home PH-SP1

Les nedenfor 📖 manual på norsk for Elektrobock Pocket Home PH-SP1 (4 sider) i kategorien Mottaker. Denne guiden var nyttig for 2 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 1.5 brukere

Side 1/4
Version 11.02
Wireless receiver for control of
electric heating devices
- UNDER THE SWITCH -
PH-SP1
Operating instructions
Control of electric heating systems
Component of the PocketHome
®
system
Two-way radio communication at 433,92 MHz
The connected electric appliance is switched
according to the required temperature
The control unit PH-BSP is the pilot component
ph_sp1_en:Layout 1 18.3.2011 13:18 Page 1
INSTALLATION
The device can only be installed by a person with adequate
qualification! The installation must be executed in
a voltage-free state!
Wiring diagram:
230 V/ 50 Hz
L
N
max.
16 A
LN
FUNCTION BUTTON ( R ) :
SHORT PRESSING (for
about1,5s) - coding.
LONG PRESSING
(for about 5s)
- RESET deleting the code from
the memory (the green and red
LEDs flash simultaneously).
PH-SP1 is used for switching the heating device in connection
with the PH-BSP control unit. The big advantage is mounted
directly into the
installation box.
ph_sp1_en:Layout 1 18.3.2011 13:18 Page 2

Produkspesifikasjoner

Merke: Elektrobock
Kategori: Mottaker
Modell: Pocket Home PH-SP1

Trenger du hjelp?

Hvis du trenger hjelp med Elektrobock Pocket Home PH-SP1 still et spørsmål nedenfor, og andre brukere vil svare deg